Operation Manual

18
GB
Symbols on the unit
Remember that the cutting equipment
will continue to move after switching
the unit off. Keep hands, feet and other
body parts away.
Attention!
Carefully read through the user manual
to reduce risk of injury.
Do not use the unit during rain, bad
weather damp surroundings or on wet
grass or hedges.
Guaranteed sound power level
Do not dispose of the device with
the battery installed in household
waste.
Symbols on the recharger
Carefully read through the user manual
The recharger is for indoor use only.
Protection class II
Power tools do not belong with domes-
tic waste.
Safety isolating transformer
125°C
Protective temperature limiter
Pole orientation
The recharger is for indoor use only.
General safety instructions for
power tools
WARNING! Read all safety direc-
tions and instructions. Omissions in
the compliance with safety directions
and instructions can cause electrical
shock, re and/or severe injuries.
Retain all safety directions and instruc-
tions for future use.
The term “Power Tools” used in the safety
instructions refers to mains-operated power
tools (with power cord) and to battery-operat-
ed power tools (without power cord).
1) WORK AREA SAFETY
a) Keep work area clean and well lit. Clut-
tered or dark areas invite accidents.
b) Do not operate power tools in explo-
-

dust. Power tools create sparks which
may ignite the dust or fumes.
c) Keep children and bystanders away
while operating a power tool. Distrac-
tions can cause you to lose control.
2) ELECTRICAL SAFETY
a) Power tool plugs must match the out-

Do not use any adapter plugs with
Un-
modied plugs and matching outlets will
reduce risk of electric shock.
 
grounded surfaces, such as pipes, ra-
diators, ranges and refrigerators. There
is an increased risk of electric shock if
your body is earthed or grounded.
c) Do not expose power tools to rain or
wet conditions. Water entering a power
tool will increase the risk of electric shock.