Operation Manual
24
GB
Extent of the delivery
Carefully unpack the appliance and check that
it is complete.
Dispose of the packaging material correctly.
- Appliance with mounted shrub trimming
blade + blade guard
- Grass trimming blade + blade guard
- Telescopic shaft
- Recharger
- Instruction Manual
Function description
The battery-powered grass and bush trimmer
is a combination unit with two interchangeable
cutting devices. These are coated with plastic
(Teon non-stick coating) to prevent rust. For
use as a shrub trimmer, a double-sided blade
block is used as the cutting head. When cut-
ting, the blades oscillate linearly against an un-
sharpened cutting plate. The catching blades
are round off at the side to prevent accidents,
and positioned in an offset arrangement to
reduce the risk of injury. A cutting head with
several blades is provided for use as a grass
trimmer. This also oscillates on a bladed plate,
producing the same movement as a pair of
scissors. The unit is equipped with a telescopic
shaft and rollers for increased working speed
and comfort. Please read the following descrip-
tions for the function of the various controlling
parts of the unit.
Loading procedure
Do not expose the battery to ex-
treme conditions such as heat and
from leaking electrolyte solution! In
case of contact, rinse with water or
neutraliser and consult a doctor if
contact has occurred with eyes etc.
Charge the battery only in dry areas.
Do not switch on the equipment during
charging. There is a risk of injury from
electric shock.
• In all cases, observe the applicable safety
information as well as the regulations and
directions for environmental protection.
• Use the charger supplied to charge the Li-
ion battery installed in the equipment.
• Before initial use, charge the battery in-
stalled in the equipment.
• High storage/operating temperatures, high
charge/discharge currents and frequent
deep discharge will shorten the life of the
battery.
• Defects resulting from improper handling
are not subject to the guarantee.
To display the state of charge of the battery,
press the “Test” button on the state of charge
indicator (see summary, no. 1):
Red + yellow + green
light up
Yellow + red light up
Red lights up