Operation Manual

UK
88
We shall not be held responsible for any
damage caused in any of the following ways:
- Improper repair
- Use of non-original parts
-
Use other than for the intended purpose
Changing the tines
Theequipmentisttedwithfourplustwo
cutting blades, which can be easily chan-
ged. Both rows of cutting blades can be
inserted to the left or right of the transmis-
sion (see
no. 21), as desired.
Always change both tine pairs at the
same time to avoid damage to the
tool from imbalance.
Switch the tool off, unplug it and
wait for the tines to stop turning.
1. Place the equipment on the
ground with the wheels pointing
upwards.
2. Undo the Allen screw and self-
locking nut (22) on the row of
cutting blades (11).
3. Take off the cutting blades from
the drive shaft (23).
4.
Clean the drive shaft with bio oil.
5. Push the new row of cutting
blades onto the drive shaft such
that the holes on the blade axis
are lined up with the holes on
the drive shaft.
6. Push the Allen screw through
the hole and screw on a new
self-locking nut (included in the
delivery contents with a new
cutting blade).
Storage
• Leavethemotortocooldownbefore
you put the tool into a closed space.
• Keepthetoolclean,dryandoutofthe
reach of children.
• Donotwraptheequipmentinplastic
bags as damp could form.
Loosen the hand wheel nuts (16)
and fold the handle bars down so
the equipment takes up less space.
Make sure that the cable does
not become jammed.
Do not use the tool with the han-
dle folded closed.
Guarantee
• Wegranta24-monthwarrantyforthis
appliance. Industrial use will invalidate
the guarantee.
• Damage due to natural wear and tear,
overload or incorrect use is excluded
from the guarantee. Certain compon-
ents are subject to normal wear and
tear and are excluded from the guaran-
tee. These include in particular: Tines.
• Furthermore, the prerequisite for gua-
rantee services is that the references
indicated in the operating instructions
regarding cleaning and maintenance
have been adhered to.
• Damage,whichhasbeencausedfrom
material or manufacturing faults, will be
made good free of charge, by replace-
ment delivery or repair.
This requires that the appliance is re-
turned to our service center undisman-
tled and with proof of purchase and
guarantee.
Repair service
• Repairs, which are not covered by the
guarantee, can be carried out for char-