Operation Manual

GB
26
the blade rmly (25). Turn the
blade screw (26) anticlockwise
off of the motor spindle using a
screwdriver.
3. Install the new blade in the
reverse order. Ensure that the
blade is positioned correctly and
the screw tightened rmly.
Storage
To reduce the space required in
storage, loosen the four star grips
and fold down the curved handle
and bottom bar. Make sure the ca-
bles are not caught.
• Keep the equipment dry and out of
reach of children.
• Allow the motor to cool before storing
the equipment in a conned space.
• Do not cover the equipment with nylon
bags as moisture could build up.
We will not be liable for damages caused
by our equipment where these are caused
by improper repair or the use of non-
original parts or by use other than for the
intended purpose.
Waste disposal and envi-
ronmental protection
Do not dispose of used oil in the sewage
system or drains. Dispose of used oil in
an environmentally correct manner - bring
it to a waste disposal center.
Be environmentally friendly. Return the tool,
accessories and packaging to a recycling
centre when you have nished with them.
Machines do not belong with do-
mestic waste.
• The plastic and metal parts employed
can be separated out and thus recy-
cled use can be implemented. Ask our
Service-Center for details.
• Throw the cut grass on the compost.
Do not throw it in the normal house-
hold waste.
• Defective units returned to us will be
disposed of for free.
Technical Specications
Electric Lawnmower ...........ERM 1846 G
Motor input power .........................1800 W
Mains voltage ............. 230-240 V~, 50 Hz
Protection class ..................................II
Protection type...................................IP24
Idling speed ..............................2900 min
-1
Cutting circle ....................................46 cm
Cut height ............................... 25 - 75 mm
Weight ...........................................28,5 kg
Lawn bag volume ................................60 l
Sound pressure level at the operator’s position
(L
pA
) .............................82,7 dB(A), K
pA
=3 dB
Sound power level (L
wA
)
guaranteed .............................. 96 dB(A)
measured ...93,1 dB(A), K
wA
=1,78 dB(A)
Vibration (a
n
) ...........1,09 m/s
2
, K=1,5 m/s
2
This device is designed for operation on
a power supply network with a system
impedance Zmax at the transfer point
(domestic connection) of a maximum of
0.269 Ohms.
The user must ensure that the device is
operated only on a power supply network
that fulls this requirement.
If necessary, the local power supply com-
pany can be asked for the system imped-
ance.
Noise and vibration values were deter-
mined according to the standards and
stipulations mentioned in the declaration
of conformity.