Riding Toy User Manual

ManualsBrandsGrizzly ManualsToyFolding Sides Garden Wagon H0771

FOLDING SIDES GARDEN

WAGON

MODEL H0771

INSTRUCTION SHEET

WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE

OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC.

#6143

PRINTED IN CHINA

Summary of content (4 pages)

PAGE 1
FOLDING SIDES GARDEN WAGON MODEL H0771 INSTRUCTION SHEET COPYRIGHT © MARCH, 2004 BY GRIZZLY INDUSTRIAL, INC. WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC.
PAGE 2
PARTS INVENTORY After removing the wagon from the box, you should find the following components: Figure 1 - Main Contents. A. Front Panel ................................................. 1 B. Back Panel ................................................. 1 C. Pull Handle ................................................. 1 D. Wheels ....................................................... 4 E. Left Rear Axle Brace .................................. 1 F. Right Rear Axle Brace................................
PAGE 3
ASSEMBLY INSTRUCTIONS REMOVAL & INVENTORY 1. Remove your new wagon from the carton. 2. Make sure all parts are present and in good condition. FRONT SUPPORT ASSEMBLY 1. Insert the yoke into the front axle support by sliding the top hole of the yoke onto the pivot post on the front axle support. Place the 10mm flat washer on the pivot post and slide the cotter pin in the pre drilled hole and spread. Bolt the center front axle brace and yoke to the bottom of the front axle support with the M8-1.
PAGE 4
H0771 Parts Breakdown and List 4 2 1 16 25 3 19 2 20 21 8 6 32 15 9 7 10 27 14 21 20 28 11 13 26 22 33 REF 12 30 31 18 5 24 23 REF PART# 15 PW04M DESCRIPTION FLAT WASHER 10MM PART# DESCRIPTION 1 PH0771001 BED PANEL 2 PH0771002 SIDE PANEL 3 PH0771003 FRONT PANEL 19 PH0771019 MALE LOCK HANDLE M8-1.25 4 PH0771004 BACK PANEL 20 PW01M FLAT WASHER 8MM 5 PH0771005 WHEEL 13" X 5.00-6 21 PLN04M LOCK NUT M8-1.