Planer User Manual



Using Wood Blocks
Tools Needed Qty

 
 
 
1. straight

 Note: Having the wood blocks at an even
height is critical to the accuracy of your
overall adjustments. For best results, make
the 2x4 square with a jointer and table saw
before cutting it in half.
2.       
   Setting/Replacing Knives
Page 36
3. 
4. 
Bed Roller Height  Page 26 

5. 
Figure 47
36"
Figure 47.

6.        

7.         
       

    

8.      

9. 
Steps 8–14
Using a Rotacator

      

 Note: Keep in mind that you will have to
repeat Steps 7–8 above for each change in
distance as specified on Page 40.