Lathe User Manual



         
       
       


      
   
   


Bolting to Concrete Floors

Figure 12
        
  


Mounting to Shop
Floor
Figure12



NOTICE
We strongly recommend securing your
machine to the floor if it is hardwired to the
power source. Consult with your electrician
to ensure compliance with local codes.
Before starting the lathe, make sure you have
correctly performed the preceding setup
instructions, and you have read through the
rest of the manual and are familiar with the
various functions and safety features on
this machine. Failure to follow this warning
could result in serious personal injury or
even death!
Test Run
       
        




       


        

     
TroubleshootingPage 48
        

GEARBOXES MUST
BE FILLED WITH OIL!
MACHINE MAY NOT BE
SHIPPED WITH OIL!
Requires Oil
Before Operation
or Warranty Will
Be Void.
Checking Gear Oil

       

Lubrication 
Page 52