Manual

G0632 16" x 42" Variable Speed Wood Lathe
-19-
Loose hair and clothing
could get caught in the
lathe and cause serious
personal injury. Keep
loose clothing and long
hair away from moving
parts of lathe.
Operation Safety
SECTION 4: OPERATIONS
NOTICE
If you have never used a wood lathe before,
WE STRONGLY RECOMMEND that you
read books, trade magazines, or get for
-
mal training before beginning any projects.
Regardless of the content in this section,
Grizzly Industrial will not be held liable for
accidents caused by lack of training.
Adjusting Headstock
The Model G0632 headstock can be positioned
anywhere along the lathe bed and swiveled 360°.
To position the headstock along the length of
the lathe bed:
1. DISCONNECT THE LATHE FROM THE
POWER SOURCE!
2. Loosen the headstock lock handle (see
Figure 17).
Figure 17. Headstock lock handle.
3. Slide the headstock to the desired location on
the bed and use the headstock lock handle to
secure the headstock in position.
Note: The large clamping hex nut under-
neath the headstock will require occasional
adjusting to ensure proper clamping pressure
of the headstock to the bed. Turn this hex nut
in small increments to fine tune the clamping
pressure as needed.
Operations
Damage to your eyes and lungs could result
from using this machine without proper pro
-
tective gear. Always wear safety glasses and
a respirator when operating this machine.