MODEL G0548Z/ G1028Z2/G1029Z2 DUST COLLECTOR OWNER'S MANUAL G0548Z G1028Z2/G1029Z2 8DENG><=I 6EG>A! '%%. 7N OOAN >C9JHIG>6A! >C8#! G:K>H:9 B6G8=! '%&& 7A WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC. ;DG BD9:AH B6CJ;68IJG:9 H>C8: ($%.
This manual provides critical safety instructions on the proper setup, operation, maintenance, and service of this machine/tool. Save this document, refer to it often, and use it to instruct other operators. Failure to read, understand and follow the instructions in this manual may result in fire or serious personal injury—including amputation, electrocution, or death. The owner of this machine/tool is solely responsible for its safe use.
Table of Contents INTRODUCTION ............................................... 2 BVcjVa 6XXjgVXn ########################################### ' 8dciVXi >c[d#################################################### ' BVX]^cZ 9ZhXg^ei^dc ###################################### ' <%*)-O >YZci^[^XVi^dc ##################################### ( <&%'-O'$<&%'.O' >YZci^[^XVi^dc ################### ) BVX]^cZ 9ViV H]ZZi ###################################### * SECTION 1: SAFETY .....................................
INTRODUCTION Manual Accuracy Contact Info LZ VgZ egdjY id d[[Zg i]^h bVcjVa l^i] ndjg cZl bVX]^cZ LZ kZ bVYZ ZkZgn Z[[dgi id WZ ZmVXi l^i] i]Z ^chigjXi^dch! heZX^[^XVi^dch! YgVl^c\h! VcY e]did\gVe]h d[ i]Z bVX]^cZ lZ jhZY l]Zc lg^i^c\ i]^h bVcjVa# =dlZkZg! hdbZi^bZh lZ hi^aa bV`Z Vc dXXVh^dcVa b^hiV`Z# LZ hiVcY WZ]^cY djg bVX]^cZh# >[ ndj ]VkZ Vcn fjZhi^dch dg cZZY ]Zae! jhZ i]Z ^c[dgbVi^dc WZadl id XdciVXi jh# 7Z[dgZ XdciVXi^c\! eaZVhZ \Zi i]Z hZg^Va cjbWZg VcY bVc
G0548Z Identification ;^aiZg 8aZVc^c\ =VcYaZ 8Vc^hiZg ;^aiZg 8daaZXidg DjiaZi 8dccZXidg 8daaZXi^dc 7V\ Bdidg ("Edgi >caZi 8dccZXidg 8VhiZg DC$D;; Hl^iX] Figure 1. GZVg k^Zl ^YZci^[^XVi^dc# Figure 2. BdYZa <%*)-O ^YZci^[^XVi^dc# BdYZa <%*)-O$<&%'-O'$<&%'.O' B[\# ($%.
G1028Z2/G1029Z2 Identification ;^aiZg 7V\ 8daaZXidg DjiaZi 8dccZXidg =dhZ 8daaZXi^dc 7V\ Bdidg >caZi 8dccZXidg 8VhiZg DC$D;; Hl^iX] Figure 3. GZVg k^Zl ^YZci^[^XVi^dc# Figure 4. BdYZa <&%'-O'$<&%'.O' ^YZci^[^XVi^dc# ")" BdYZa <%*)-O$<&%'-O'$<&%'.O' B[\# ($%.
Machine Data Sheet 0$&+,1( '$7$ 6+((7 Customer Service #: (570) 546-9663 · To Order Call: (800) 523-4777 · Fax #: (800) 438-5901 02'(/ * = +3 &$1,67(5 '867 &2//(&725 EgdYjXi 9^bZch^dch/ Weight.............................................................................................................................................................. 145 lbs. Width (side-to-side) x Depth (front-to-back) x Height............................................................... 37-3/8 x 31-1/2 x 71 in.
BV^c HeZX^[^XVi^dch/ DeZgVi^dc Air Suction Capacity.......................................................................................................................... 1700 CFM Maximum Static Pressure.......................................................................................................................... 10 in. Main Inlet Size............................................................................................................................................. 6 in.
BdYZa <%*)-O$<&%'-O'$<&%'.O' B[\# ($%.
7V\ >c[dgbVi^dc No of Upper Bags............................................................................................................................................. 1 Upper Bag Capacity............................................................................................................................. 5.7 cu. ft. Lower Bag Capacity............................................................................................................................. 5.7 cu. ft. No of Lower Bags........
0$&+,1( '$7$ 6+((7 Customer Service #: (570) 546-9663 · To Order Call: (800) 523-4777 · Fax #: (800) 438-5901 02'(/ * = +3 '867 &2//(&725 :,7+ 0,&521 %$* $1' 1(: ,03(//(5 EgdYjXi 9^bZch^dch/ Weight................................................................................................................................................................ 95 lbs. Width (side-to-side) x Depth (front-to-back) x Height...............................................................
7V\ >c[dgbVi^dc No of Upper Bags............................................................................................................................................. 1 Upper Bag Capacity............................................................................................................................ 5.7 cu. ft. Lower Bag Capacity............................................................................................................................. 5.7 cu. ft. No of Lower Bags.........
SECTION 1: SAFETY For Your Own Safety, Read Instruction Manual Before Operating this Machine The purpose of safety symbols is to attract your attention to possible hazardous conditions. This manual uses a series of symbols and signal words intended to convey the level of importance of the safety messages. The progression of symbols is described below. Remember that safety messages by themselves do not eliminate danger and are not a substitute for proper accident prevention measures.
DISCONNECTING POWER SUPPLY. 6alVnh Y^h" XdccZXi bVX]^cZ [gdb edlZg hjeean WZ[dgZ hZg" k^X^c\! VY_jhi^c\! dg X]Vc\^c\ Xjii^c\ iddah W^ih! WaVYZh! XjiiZgh! ZiX# # BV`Z hjgZ hl^iX] ^h ^c D;; edh^i^dc WZ[dgZ gZXdccZXi^c\ id Vkd^Y Vc jcZmeZXi" ZY dg jc^ciZci^dcVa hiVgi# APPROVED OPERATION.
Additional Safety for Dust Collectors INTENDED USE. I]^h Yjhi XdaaZXidg ^h dcan ^ciZcY" ZY [dg XdaaZXi^c\ lddY Yjhi VcY X]^eh [gdb lddY" ldg`^c\ bVX]^cZh# 9D CDI jhZ i]^h Yjhi XdaaZXidg id XdaaZXi bZiVa! Y^gi! eZWWaZh! YgnlVaa! VhWZhidh! aZVY eV^ci! h^a^XV! a^fj^Yh! VZgdhdah! dg Vcn [aVb" bVWaZ! XdbWjhi^WaZ! dg ]VoVgYdjh bViZg^Vah# HAZARDOUS DUST.
SECTION 2: POWER SUPPLY Availability Circuit Information 7Z[dgZ ^chiVaa^c\ i]Z bVX]^cZ! Xdch^YZg i]Z VkV^a" VW^a^in VcY egdm^b^in d[ i]Z gZfj^gZY edlZg hjeean X^gXj^i# >[ Vc Zm^hi^c\ X^gXj^i YdZh cdi bZZi i]Z gZfj^gZbZcih [dg i]^h bVX]^cZ! V cZl X^gXj^i bjhi WZ ^chiVaaZY# Id b^c^b^oZ i]Z g^h` d[ ZaZXigdXj" i^dc! [^gZ! dg Zfj^ebZci YVbV\Z! ^chiVaaVi^dc ldg` VcY ZaZXig^XVa l^g^c\ bjhi WZ YdcZ Wn V fjVa^[^ZY ZaZXig^X^Vc ^c VXXdgYVcXZ l^i] Vaa Veea^XVWaZ XdYZh VcY hiVcYVgYh# 6 edlZg hje
G1028Z2 Circuit Requirements for 110V Operation I]^h bVX]^cZ ^h egZl^gZY id deZgViZ dc V &&%K edlZg hjeean X^gXj^i i]Vi ]Vh V kZg^[^ZY \gdjcY VcY bZZih i]Z [daadl^c\ gZfj^gZbZcih/ Full Load Current Rating ............................18A Nominal Voltage ............................... 110V/120V Cycle ..........................................................60 Hz Phase ........................................... Single-Phase Circuit Rating ......................................
3.
SECTION 3: SETUP Needed for Setup This machine presents serious injury hazards to untrained users. Read through this entire manual to become familiar with the controls and operations before starting the machine! Wear safety glasses during the entire setup process! This machine and its components are very heavy. Get lifting help or use power lifting equipment such as a forklift to move heavy items.
G0548Z Inventory I]Z [daadl^c\ ^h V YZhXg^ei^dc d[ i]Z bV^c Xdbed" cZcih h]^eeZY l^i] ndjg bVX]^cZ# AVn i]Z Xdbed" cZcih dji id ^ckZcidgn i]Zb# Box 2: (Figure 11) Qty J. 8Vc^hiZg ;^aiZg ############################################# & K. ;dVb 6Y]Zh^kZ 7V\ ################################### & · L^YZ ;dVb Hig^e * m )'bb ################### & · CVggdl ;dVb Hig^e + m '%bb ################ & L. 8Vc^hiZg 7Zai 8aVbe ################################### & M.
G1028Z2/G1029Z2 Inventory I]Z [daadl^c\ ^h V YZhXg^ei^dc d[ i]Z bV^c Xdbed" cZcih h]^eeZY l^i] ndjg bVX]^cZ# AVn i]Z Xdbed" cZcih dji id ^ckZcidgn i]Zb# 6 8 7 9 >[ Vcn cdc"egdeg^ZiVgn eVgih VgZ b^hh^c\ Z#\# V cji dg V lVh]Zg ! lZ l^aa \aVYan gZeaVXZ i]Zb0 dg [dg i]Z hV`Z d[ ZmeZY^ZcXn! gZeaVXZbZcih XVc WZ dWiV^cZY Vi ndjg adXVa ]VgYlVgZ hidgZ# D Inventory: Qty A. Bdidg >beZaaZg 6hhZbWan ######################## & B. 8daaZXidg 7dYn 6hhZbWan ########################### & C.
Site Considerations G0548Z Assembly To assemble your dust collector: Floor Load GZ[Zg id i]Z Machine Data Sheet [dg i]Z lZ^\]i VcY [ddieg^ci heZX^[^XVi^dch d[ ndjg bVX]^cZ# HdbZ gZh^YZci^Va [addgh bVn gZfj^gZ VYY^i^dcVa gZ^c[dgXZbZci id hjeedgi Wdi] i]Z bVX]^cZ VcY deZgVidg# 1. EaVXZ i]Z WVhZ jeh^YZ Ydlc dc V [aVi! egd" iZXiZY hjg[VXZ# 2.
4. EaVXZ V gjWWZg \Vh`Zi VgdjcY i]Z ^beZaaZg djiaZi g^b! Vh h]dlc ^c Figure 16# 6. 6a^\c i]Z XVc^hiZg hjeedgi l^i] i]Z bdjci^c\ ]daZh dc i]Z WVhZ! Vh h]dlc ^c Figure 18! i]Zc hZXjgZ ^i ^c eaVXZ l^i] ' *¿&+"&- m &¿' [aVc\Z Wdaih#
9. 6eean i]Z VY]Zh^kZ"WVX`ZY * m )'bb l^YZ [dVb hig^e id i]Z djih^YZ ide d[ i]Z XdaaZXidg! Vh h]dlc ^c Figure 20! VcY ig^b i]Z ZmXZhh hd i]Vi i]Z ZcYh d[ i]Z hig^e XdbZ id\Zi]Zg ZkZcan! Vh h]dlc ^c Figure 21# L^YZ ;dVb Hig^e 10. 6a^\c i]Z ]Zm Wdai d[ i]Z XVc^hiZg XaZVc^c\ ]VcYaZ l^i] i]Z [aVi d[ i]Z XVc^hiZg h]V[i! Vh h]dlc ^c Figure 22! eaVXZ i]Z ]VcYaZ dc i]Z h]V[i! i]Zc i^\]iZc i]Z ]Zm Wdai# =Zm 7dai 8Vc^hiZg H]V[i ;aVi Figure 20.
12. 6eean i]Z + m '%bb cVggdl [dVb hig^e id i]Z Wdiidb d[ i]Z XdaaZXidg! i]Zc ig^b i]Z ZmXZhh VcY ZkZcan bViX] i]Z ZcYh hZZ Figure 23 # 13. 6iiVX] V XdaaZXi^dc WV\ id i]Z ]dd`h VgdjcY i]Z Wdiidb d[ i]Z XdaaZXidg! i]Zc i^\]iZc i]Z XdaaZXi^dc WV\ XaVbe VgdjcY i]Z [dVb hig^e id ]daY i]Z WV\ ^c eaVXZ! Vh h]dlc ^c Figure 24# G1028Z2/G1029Z2 Assembly To assemble your machine: 1.
3. >chZgi i]Z gjWWZg \Vh`Zi WZilZZc i]Z XdaaZX" idg VcY adlZg djiaZi [aVc\Z! VcY hZXjgZ i]Z [aVc\Z l^i] - *¿&+ "&- m &¿' [aVc\Z Wdaih! Vh h]dlc ^c Figure 28. Note: When connecting parts that have a gasket applied to the mounting surface, always tighten the fasteners in a crisscross manner to ensure the gasket does not become crimped and the seal compromised. AdlZg DjiaZi ;aVc\Z 5. HZXjgZ i]Z [gdci adlZg hjeedgi WgVX`Zi id i]Z XdaaZXidg l^i] ' *¿&+ "&- m &¿' [aVc\Z Wdaih# 6.
8. 6eean i]Z [dVb hig^eh id i]Z XdaaZXidg WdYn Vh YZhXg^WZY ^c G0548Z Assembly! Step 9! dc Page 21# 9. =dd` i]Z ide adde d[ i]Z jeeZg [^aiZg WV\ [VWg^X dkZg i]Z hjeedgi WgVX`Zi! Vh h]dlc ^c Figure 32. 11.
Test Run To test run the machine: 1. BV`Z hjgZ ndj ]VkZ gZVY i]Z hV[Zin ^chigjX" i^dch Vi i]Z WZ\^cc^c\ d[ i]Z bVcjVa VcY i]Vi i]Z bVX]^cZ ^h hZi je egdeZgan# Do NOT put hands or small objects near inlet openings during operation. Objects sucked into the inlet will hit the impeller blade. Failure to heed this warning could result in property damage or personal injury.
SECTION 4: DESIGNING THE SYSTEM General Always guard against static electrical build up by grounding all dust collection lines. I]Z BdYZa <%*)-O$<&%'-O'$<&%'.O' XVc WZ deZgViZY Vh Z^i]Zg V hiVi^dcVgn dg V bdW^aZ jc^i# I]ZgZ VgZ VYkVciV\Zh VcY Y^hVYkVciV\Zh id Wdi] hZi"jeh# I]Z VYkVciV\Z d[ i]Z bdW^aZ hnhiZb ^h Za^b^cVi^c\ i]Z Xdhi d[ bVcn YjXih VcY [^ii^c\h# Dc i]Z di]Zg ]VcY! i]Z hiVi^dcVgn hnhiZb ^h bdgZ kZghVi^aZ VcY XdckZc^Zci# >[ jh^c\ i]Z BdYZa <%*)-O$<&%'-O'$<&%'.
I]ZgZ VgZ V cjbWZg d[ dei^dch l]Zc ^i XdbZh id bZiVa YjXi! Wji bZiVa YjXi i]Vi ^h heZX^Vaan bVcj" [VXijgZY [dg Yjhi XdaaZXi^dc ^h i]Z WZhi X]d^XZ# L]Zc hZaZXi^c\ ndjg bZiVa YjXi! X]ddhZ ]^\] fjVa^in bZiVa YjXi l^i] hbddi] lZaYZY ^ciZgcVa hZVbh i]Vi l^aa b^c^b^oZ V^g[adl gZh^hiVcXZ# I]^h ineZ d[ YjXi jhjVaan XdccZXih id di]Zg YjXih dg ZaWdlh l^i] V h^beaZ! hZa["hZVa^c\ XaVbe! ^h kZgn fj^X` VcY ZVhn id VhhZbWaZ! VcY XVc WZ gZVY^an Y^hbVciaZY VcY gZ"^chiVa
System Design Step 1. Decide Who Will Design ;dg bdhi hbVaa"id"bZY^jb h^oZY h]deh! ndj XVc YZh^\c VcY Wj^aY i]Z Yjhi XdaaZXi^dc hnhiZb ndjg" hZa[ l^i]dji ]^g^c\ Zc\^cZZgh dg XdchjaiVcih# LZ ]VkZ ^cXajYZY hdbZ WVh^X ^c[dgbVi^dc ]ZgZ id \Zi ndj hiVgiZY dc V WVh^X YZh^\c# >[ ndj ]VkZ V aVg\Z h]de dg ZcY je YZh^\c^c\ V Xdbea^XViZY hnhiZb! i]Zc lZ gZXdbbZcY VYY^" i^dcVa gZhZVgX] WZndcY i]^h bVcjVa! dg i]Vi ndj hZZ` i]Z ]Zae d[ Vc ZmeZgi# Step 3.
9^gZXi^dcVa X]Vc\Zh h]djaY WZ `Zei id V b^c^" bjb# I]Z bdgZ Y^gZXi^dcVa X]Vc\Z [^ii^c\h ndj jhZ Y^gZXian ^cXgZVhZh i]Z dkZgVaa gZh^h" iVcXZ id V^g[adl# 3. 4.
Determining Main Line Duct Size I]Z \ZcZgVa gjaZ d[ i]jbW [dg V bV^c a^cZ YjXi ^h i]Vi i]Z kZadX^in d[ i]Z V^g[adl bjhi cdi [Vaa WZadl (*%% ;EB# ;dg hbVaa$bZY^jb h^oZY h]deh! jh^c\ i]Z ^caZi h^oZ d[ i]Z Yjhi XdaaZXidg Vh i]Z bV^c a^cZ YjXi h^oZ l^aa jhjVaan `ZZe i]Z V^g kZadX^in VWdkZ (*%% ;EB VcY! YZeZcY^c\ dc ndjg hnhiZb! l^aa Vaadl ndj id `ZZe bjai^eaZ WgVcX]Zh deZc Vi dcZ i^bZ# ) * ) ) + * ) ) BVg` ndjg YgVl^c\ Vh ^c Figure 45! Wji jh^c\ i]Z ^caZi h^oZ
Calculating Duct Resistance 6YY^c\ YjXi ldg`! ZaWdlh! WgVcX]Zh VcY Vcn di]Zg XdbedcZcih id V YjXi a^cZ ^cXgZVhZh V^g[adl gZh^hiVcXZ hiVi^X egZhhjgZ adhh # I]^h gZh^hiVcXZ XVc WZ b^c^b^oZY Wn jh^c\ g^\^Y hbddi] e^eZ VcY \gVYjVa XjgkZh! Vh deedhZY id [aZm^WaZ e^eZ VcY .
Note: When calculating static pressure loss to determine if multiple lines can be left open at the same time, only include the main line numbers once. 5.
7Z hjgZ i]Vi ndj ZmiZcY i]Z WVgZ XdeeZg l^gZ Ydlc Vaa WgVcX]Zh d[ i]Z hnhiZb# 9d cdi [dg\Zi id XdccZXi i]Z l^gZh id ZVX] di]Zg l^i] l^gZ cjih l]Zc ild WgVcX]Zh bZZi Vi V ¸N¹ dg ¸I¹ XdccZX" i^dc# :chjgZ i]Vi i]Z Zci^gZ hnhiZb ^h \gdjcYZY# >[ jh^c\ eaVhi^X WaVhi \ViZh id Y^gZXi V^g [adl! i]Z \gdjcY^c\ l^gZ bjhi WZ _jbeZY Figure 51 VgdjcY i]Z WaVhi \ViZ l^i]dji ^ciZggjei^dc id i]Z \gdjcY^c\ hnhiZb# :miZgcVa ciZgcVa
SECTION 5: OPERATIONS To reduce the risk of serious injury when using this machine, read and understand this entire manual before beginning any operations. Damage to your eyes and lungs could result from using this machine without proper protective gear. Always wear safety glasses and a respirator when operating this machine. Do NOT put hands or small objects near inlet openings during operation. Objects sucked into the inlet will meet with the impeller blade.
accessories SECTION 6: ACCESSORIES Some aftermarket accessories can be installed on this machine that could cause it to function improperly, increasing the risk of serious personal injury. To minimize this risk, only install accessories recommended for this machine by Grizzly.
G6162—4" x 5' Straight Metal Pipe G7346—5" x 5' Straight Metal Pipe G7364—6" x 5' Straight Metal Pipe H5227—7" x 5' Straight Metal Pipe H5237—8" x 5' Straight Metal Pipe I]ZhZ aVhZg lZaYZY higV^\]i e^eZh ZchjgZ V hjeZg hbddi] ^ciZgcVa hZVb# :cYh ZVh^an XaVbe id\Zi]Zg [dg V hZVaZY [^i l^i]dji hXgZlh dg h^a^XdcZ# Metal Branches LZ XVggn bVcn Y^[[ZgZci WgVcX]Zh! Vaa YZh^\cZY id b^c^b^oZ V^g[adl gZh^hiVcXZ# Figure 58.
SECTION 7: MAINTENANCE Bag Cleaning Always disconnect power to the machine before performing maintenance. Failure to do this may result in serious personal injury.
Emptying/Replacing Bags Id XaZVc i]Z XVc^hiZg [^aiZg dc i]Z BdYZa <%*)-O BdkZ i]Z XVc^hiZg XaZVc^c\ ]VcYaZ WVX`"VcY"[dgi] id [gZZ i]Z igVeeZY Yjhi eVgi^XaZh [gdb i]Z [^aiZg eaZVih hZZ Figure 61 # I]Z eVgi^XaZh l^aa [Vaa ^cid i]Z XdaaZXi^dc WV\# NOTICE The use of compressed air or liquids to clean the canister filter will damage the filtration pleats of the filter. Use ONLY the cleaning handle or, if necessary, a soft brush to clean the inside of the canister filter.
SECTION 8: SERVICE GZk^Zl i]Z igdjWaZh]ddi^c\ VcY egdXZYjgZh ^c i]^h hZXi^dc id [^m dg VY_jhi ndjg bVX]^cZ ^[ V egdWaZb YZkZa" deh# >[ ndj cZZY gZeaVXZbZci eVgih dg ndj VgZ jchjgZ d[ ndjg gZeV^g h`^aah! i]Zc [ZZa [gZZ id XVaa djg IZX]c^XVa Hjeedgi Vi *,% *)+".
Dust Collector Operation Hnbeidb Edhh^WaZ 8VjhZ AdjY! gZeZi^i^djh cd^hZ! dg ZmXZhh^kZ k^WgVi^dc Xdb^c\ [gdb Yjhi XdaaZXidg# &# 9jhi XdaaZXidg ^h cdi dc V [aVi hjg[VXZ VcY &# HiVW^a^oZ i]Z Yjhi XdaaZXidg# ldWWaZh# '# 9^hXdccZXi Yjhi XdaaZXidg [gdb edlZg! VcY ^cheZXi '# >beZaaZg ^h YVbV\ZY VcY jcWVaVcXZY# i]Z ^beZaaZg [dg YZcih! WZcYh! addhZ [^ch# GZeaVXZ ^beZaaZg ^[ Vcn YVbV\Z ^h [djcY# (# I]Z bdidg bdjci^c\ dg ]djh^c\ XdccZXi^dch (# BV`Z hjgZ Vaa [VhiZcZgh dc i]Z Y
bVX]^cZ SECTION 9: WIRING I]ZhZ eV\Zh VgZ XjggZci Vi i]Z i^bZ d[ eg^ci^c\# =dlZkZg! ^c i]Z he^g^i d[ ^begdkZbZci! lZ bVn bV`Z X]Vc\" Zh id i]Z ZaZXig^XVa hnhiZbh d[ [jijgZ bVX]^cZh# 8dbeVgZ i]Z bVcj[VXijgZ YViZ d[ ndjg bVX]^cZ id i]Z dcZ hiViZY ^c i]^h bVcjVa! VcY hijYn i]^h hZXi^dc XVgZ[jaan# >[ i]ZgZ VgZ Y^[[ZgZcXZh WZilZZc ndjg bVX]^cZ VcY l]Vi ^h h]dlc ^c i]^h hZXi^dc! XVaa IZX]c^XVa Hjeedgi Vi *,% *)+".
l^g^c\ Y^V\gVb G0548Z Wiring Diagram HiVgi 8VeVX^idg (%%B;9 &'*K68 Motor
220V Rewire G1028Z2 Wiring Diagram The motor wiring shown here is current at the time of printing, but it may not match your machine. Always use the wiring diagram inside the motor junction box. View this page in color at www.grizzly.com.
G1029Z2 Wiring Diagram HiVgi 8VeVX^idg# ''% Kdai HiVgi 8VeVX^idg (%%B;9 &'*K68 7a 7a
SECTION 10: PARTS G0548Z Main Breakdown ',6 &) =*,-( EVgih 7gZV`Ydlc dc Page 48 '( )& ') '' ' () &. &,"& &,"* &,"( )' ' (* &,"' &,") '' (% (+ '- &, '* (, && (&* &' (( &% (. - '& . , ' &' &- )% + * &( '. (& ) & ' ")+" '+ '."& (' BdYZa <%*)-O$<&%'-O'$<&%'.O' B[\# ($%.
G0548Z Main Parts List REF PART # DESCRIPTION REF PART # DESCRIPTION 1 2 4 5 6 7 8 9 10 11 12 13 14 15 17 17-1 17-2 17-3 17-4 17-5 18 19 21 CASTERS FLANGE BOLT 5/16-18 X 1/2 BASE PLATE PHLP HD SCR 10-24 X 3/8 6" INLET COVER V2.10.
=*,-( WgZV`Ydlc H5783 Canister Filter Assembly & ' '% , ( '& '' '( * + &( ) - &' && &% . &+ &* ') * + &) &' &, , &&. REF PART # DESCRIPTION REF PART # DESCRIPTION & ' ( ) * + , . &% && &' 8A:6C>C< =6C9A: =:M 7DAI B+"& M &+ 86C>HI:G ;>AI:G =:M HE>C9A: I=GJHI 7:6G>C< &' M &) M + 7:6G>C< EA6I: E=AE =9 H8G B*"#- M &% ;A6E 7D6G9 =:M 7DAI B+"& M &% GJ77:G ;A6E ;A6E EA6I: E=AE =9 H8G B*"#- M &* &( &) &* &+ &, &&.
G1028Z2/G1029Z2 Parts Breakdown '+ ', ' (& (% '( ') ' '% ' '& &,"& &,"' &,"( '( '% &,"* ' &,") ( ' &. '- &, '* &* &' &% &+ () &%' &%& &%( &%) &%* '' && &' &) - ' . , + * &- '. &( ) & ' (( (' '."& Safety labels warn about machine hazards and ways to prevent injury. The owner of this machine MUST maintain the original location and readability of the labels on the machine. If any label is removed or becomes unreadable, REPLACE that label before using the machine again.
G1028Z2 Parts List REF PART # DESCRIPTION REF PART # DESCRIPTION 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 17-1 17-2 17-3 17-4 17-5 18 CASTER FLANGE BOLT 5/16-18 X 1/2 KEY 6 X 6 X 28 BASE PLATE PHLP HD SCR 10-24 X 3/8 INLET COVER 6" CAP SCREW M6-1 X 20 (LH) SET SCREW 3/8-16 X 3/8 SPECIAL WASHER IMPELLER 12-3/4" BLADE 3-1/2" COLLECTOR BODY FLAT WASHER 5/16 POWER CORD HEX NUT 5/16-18 HEX BOLT 5/16-18 X 1 PUSH BUTTON SWITCH MOTOR 1-1/2HP 110/220V 1PH MOTOR FAN COVER MOTOR FAN CAPACITOR COVER S CAPACITOR 3
WARRANTY CARD CVbZ TTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTT HigZZi TTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTT 8^in TTTTTTTTTTTTTTTTTTTTTTT HiViZ TTTTTTTTTTTTTTTTTTTTTTTTT O^e TTTTTTTTTTTTTTTTTTTTT E]dcZ TTTTTTTTTTTTTTTTTTTT :bV^a TTTTTTTTTTTTTTTTTTTTTTTT >ckd^XZ TTTTTTTTTTTTTTTTT BdYZa TTTTTTTTTTTTTTTTTTTT DgYZg TTTTTTTTTTTTTTTTTTTTTTT HZg^Va TTTTTTTTTTTTTTTTTT The following information is given on a voluntary basis.
;DA9 6ADC< 9DII:9 A>C: EaVXZ HiVbe =ZgZ '2)::,9 ).$5342)!, ).# 0 / "/8 "%,,).
WARRANTY AND RETURNS 7!22!.49 !.$ 2%452.
Buy Direct and Save with Grizzly ® – Trusted, Proven and a Great Value! ~Since 1983~ Visit Our Website Today For Current Specials! ORDER 24 HOURS A DAY! 1-800-523-4777
