RADIAL DRILL PRESS MODEL G1131 INSTRUCTION MANUAL 1995 BY GRIZZLY IMPORTS, INC. WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY IMPORTS, INC. OCTOBER, 1995. PRINTED IN USA DISCONTINUED MACHINE MANUAL DISCLAIMER THE INFORMATION IN THIS MANUAL REPRESENTS THE LAST CONFIGURATION OF THE MACHINE BEFORE IT WAS DISCONTINUED. MACHINE CONFIGURATIONS MAY HAVE CHANGED AS PRODUCT IMPROVEMENTS WERE INCORPORATED.
WARNING Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to the State of California to cause cancer, birth defects or other reproductive harm. Some examples of these chemicals are: • Lead from lead-based paints. • Crystalline silica from bricks, cement, and other masonry products. • Arsenic and chromium from chemically treated lumber. Your risk from these exposures varies, depending on how often you do this type of work.
Section 1: Introduction To The Model G1131 Radial Drill Press Grizzly Imports, Inc. is proud to offer the Model G1131 Radial Drill Press. When used according to the guidelines stated in this manual, you can expect years of troublefree, enjoyable operation from this fine machine. Most importantly, we stand behind our machines. We have two excellent regional service departments available, should the need arise.
The specifications, drawings, and photographs illustrated in this manual represent the Model G1131 as supplied when the manual was prepared. However, due to Grizzly’s policy of continuous improvement, changes or modifications may be made at any time with no obligation on the part of Grizzly. Whenever possible though, we send manual updates to all owners of a particular tool or machine. Should you receive one, add the new information to this manual and keep it for later reference.
Section 2: Safety Guidelines 1. KNOW YOUR POWER TOOL. Read the owner’s manual carefully. Learn the tool’s applications and limitations, as well as its particular hazards. 2. KEEP ALL GUARDS IN PLACE and in working order. 3. GROUND ALL TOOLS. If an adapter is used to accommodate a two-prong receptacle, the adapter plug must be attached to a known ground. Never remove the grounding prong. 4. 5. 6. 7. 8. 9. REMOVE ADJUSTING KEYS AND WRENCHES.
Section 3: Controls And Adjustments TABLE ADJUSTMENTS HEIGHT ADJUSTMENT ANGLE ADJUSTMENT Table height adjustment on the Model G1131 Radial Drill Press is controlled by a rack-and-pinion gearing system. To control the height of the table: The table’s angle relative to spindle travel can be adjusted to 45° left or right. To adjust the table tilt: 1. 2. 3. Release the locking lever on the rear of the table’s gear housing, mounted on the vertical column.
ON/OFF SWITCH The Model G1131 Radial Drill Press is equipped with a key-activated ON/OFF switch for added safety. To switch on the drill press: 1. Insert the safety key into the switch mechanism located at the front of the spindle assembly. 2. Flip the key to the ON position. 3. When drilling is complete, switch the key to the OFF position. When the drill press is not in use, remove the key from the switch and store it in a safe place. 4.
SPINDLE SPEEDS TILTING DRILL HEAD The Model G1131 features a five-speed belt drive system – so you can adjust drill speeds to match your project. To change spindle speeds: Adjust the drill head up to 45° clockwise or counterclockwise by loosening the tilt lock knob on the right side of the horizontal column support. An angle guide at the front of the column support allows you to determine the angle of spindle travel. 1. Turn off and unplug the drill press and allow all moving parts to stop. 2.
SECTION 4 — MACHINE DATA GRIZZLY MODEL G1131 RADIAL DRILL PRESS Design Type ..........................................................................................................Bench Model Overall Dimensions: Table Size ................................................................................................................85/8"W x 91/8" Overall Height ......................................................................................................................311/2" Overall Width ......
SECTION 5 — PARTS LIST & DIAGRAM Diag# Part # Description Diag# Part # Description 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 PG1131001 PG1131002 PB07 PG1131004 PG1131005 PG1131006 PG1131007 PW01 PB53 PG1131010 PG1131011 PG1131012 PG1131013 PSS02 PG1131015 PG1131016 PG1131017 PG1131018 PG1131019 PG1131020 PG1131021 PG1131131 PG1131023 PS04 PG1131025 PG1131026 PG1131027 PB203 PG1131029 PLW01 PLN08 PG1131032 PG1131033 PG1131034 PSW07 PSS02 P
G1131 RADIAL DRILL PRESS 23 52 66 21 53 24 67 68 54 22 65 53 20 64 62 16 63 25 13 26 17 18 14 15 36 27 24 28 28 27 34 61 33 49 76 11 12 69 7 31 71 70 10 32 60 56 36 74 75 59 73 46 38 35 57 56 50 51 8 58 39 37 9 45 29 40 55 5 4 48 47 41 3 30 2 42 44 1 43 6 72
SECTION 6 — WARRANTY INFORMATION Grizzly Imports, Inc. warrants every product it sells for a period of 1 year to the original purchaser from the date of purchase. This warranty does not apply to defects due directly or indirectly to misuse, abuse, negligence, accidents, repairs or alterations or lack of maintenance.
