- GRIZZLY 6" X 47" HEAVY-DUTY JOINTER INSTRUCTION MANUAL G1182HW, G1182ZHW, G1182Z, G1182ZX

G1182 6" Series Jointers -7-
SECTION 3: INTRODUCTION
We are proud to offer these four models of the
Model G1182 6" Jointer. These machines are part
of a growing Grizzly family of fine woodworking
machinery. When used according to the guide-
lines set forth in this manual, you can expect
years of trouble-free, enjoyable operation and
proof of Grizzly’s commitment to customer satis-
faction.
The Model G1182 Jointer Series all feature 1 H.P.
TEFC motors driving a three-knife cutterhead at
5000 R.P.M. The knives are high speed steel,
resharpenable, and are adjusted by means of jack
screws or springs, making blade setting quick and
easy. The infeed and outfeed tables are ground
cast iron and are mounted on dovetailed ways
with adjustable gibs.
Depending upon the model you selected, table
height is adjustable by means of levers or hand-
wheels. The operator controls on the Model
G1182ZX are conveniently mounted on a
pedestal above the tables. The Z-Series models
incorporate a one piece cabinet style stand and a
dust hood for easy connection to a dust collection
system.
We are also pleased to provide this universal
manual covering all of the G1182 models. It was
written to guide you through assembly, review
safety considerations, and cover general operat-
ing procedures. It represents our effort to produce
the best documentation possible. If you have any
comments regarding this manual, please write to
us at the address below:
Grizzly Industrial, Inc.
C
/O Technical Documentation
P.O. Box 2069
Bellingham, WA 98227-2069
The specifications, drawings, and photographs
illustrated in this manual represent the Model
G1182 series jointers as supplied when the man-
ual was prepared. However, owing to Grizzly’s
policy of continuous improvement, changes may
be made at any time with no obligation on the part
of Grizzly. Whenever possible, though, we send
manual updates to all owners of a particular tool
or machine. Should you receive one, we urge you
to insert the new information with the old and keep
it for reference.
Commentary
Read the manual before
assembly and opera-
tion. Become familiar
with the machine and its
operation before begin-
ning any work. Serious
personal injury may
result if safety or opera-
tional information is not
understood or followed.
Most importantly, we stand behind our machines.
If you have any service questions or parts
requests, please call or write us at the location
listed below.
Grizzly Industrial, Inc.
1203 Lycoming Mall Circle
Muncy, PA 17756
Phone: [phone]
Fax: [phone]
E-Mail: [e-mail]
Web Site: http://www.grizzly.com