2" SLIP ROLL MODEL G7148 INSTRUCTION MANUAL COPYRIGHT © OCTOBER, 2001 BY GRIZZLY INDUSTRIAL, INC. WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC.
SAFETY For Your Own Safety Read Instruction Manual Before Operating This Equipment The purpose of safety symbols is to attract your attention to possible hazardous conditions. This manual uses a series of symbols and signal words which are intended to convey the level of importance of the safety messages. The progression of symbols is described below. Remember that safety messages by themselves do not eliminate danger and are not a substitute for proper accident prevention measures.
GENERAL INFORMATION Commentary Grizzly Industrial, Inc. is proud to offer the Model G7148 12" Slip Roll. This tool is part of Grizzly’s growing family of fine machinery. When used according to the guidelines stated in this manual, you can expect years of trouble-free, enjoyable operation. We are also pleased to provide this manual with the Model G7148. It was written to guide you through assembly, review safety considerations, and cover general operating procedures.
Unpacking If you discover the slip roll is damaged after you’ve signed for delivery, and the truck and driver are gone, you will need to file a freight claim with the carrier. Save the containers and all packing materials for possible inspection by the carrier or its agent. Without the packing materials, filing a freight claim can be difficult. If you need assistance determining whether you need to file a freight claim, or with the procedure to file one, please contact our Customer Service.
MOUNTING & ADJUSTMENTS Adjusting Wear safety glasses during the entire assembly process. Failure to comply may result in serious personal injury. Some metal parts may have sharp edges on them after they are formed. Please examine the edges of all metal parts before handling them. Failure to do so could result in injury. MATERIAL THICKNESS The distance between the fixed shaft and the front movable shaft allow for varying thicknesses of material.
SECTION 6: OPERATION Wear safety glasses during all operations on the slip roll. Failure to comply may result in serious personal injury. Keep loose clothing rolled up and out of the way of rollers and keep hair pulled back. Forming Wires Using The Slip Roll 1. To form wires, select the smallest groove that you can use (see grooves shown in Figure 3) and put the edge of that wire on the groove of the front movable shaft. Insert material edge between the fixed shaft and the front movable shaft. 2.
MAINTENANCE Lubrication Grease Fitting Occasionally lubricate the gears with a medium weight wheel bearing grease through the grease fitting shown in Figure 4. Frequency of lubrication will depend on the amount of use. Roller shafts should also be maintained with rust protecting oil such as Boeshield® T-9 or Model G2870/G2871 in the Grizzly catalog. Figure 4. Grease fitting.
REF 01 02 03 04 05 06 07 08 09 10 11 12 14 -6- PART # P7148001 P7148002 P7148003 P7148004 P7148005 P7148006 P7148007 P7148008 P7148009 P7148010 P7148011 PW03M PS11M DESCRIPTION Adjustment Screw Grease Cup Rotating Support Adjustment Knob Left Stand Bushing Flat Key 4 x 8 Rear Movable Shaft Handle Shaft Right Stand Release Rod Flat Washer 6mm Screw M6-1 x 16 REF PART # DESCRIPTION 15 16 17 18 19A 23 24 25 26 27 28 29 P7148015 P7148016 P7148017 P7148018 P7148019A P7148023 P7148024 P7148025 PW04M PLW
WARRANTY AND RETURNS Grizzly Industrial, Inc. warrants every product it sells for a period of 1 year to the original purchaser from the date of purchase. This warranty does not apply to defects due directly or indirectly to misuse, abuse, negligence, accidents, repairs or alterations or lack of maintenance.
WARRANTY CARD Name ____________________________________________________________________________________ Street ____________________________________________________________________________________ City ______________________________________________________________State________Zip_________ Phone Number_______________________E-Mail_______________________FAX________________________ MODEL # G7148 12" Slip Roll Order #______________________________________________ The following information is given on a voluntary
