WWW.GRIZZLY.COM MINI GRINDER KIT MODEL G8601 INSTRUCTION MANUAL COPYRIGHT © 1999 BY GRIZZLY INDUSTRIAL, INC. 1821 VALENCIA ST., BELLINGHAM, WA 98227 WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC. NOVEMBER, 1999 PRINTED IN U.S.A.
SAFETY For Your Own Safety Read Instruction Manual Before Operating This Equipment The purpose of safety symbols is to attract your attention to possible hazardous conditions. This manual uses a series of symbols and signal words which are intended to convey the level of importance of the safety messages. The progression of symbols is described below. Remember that safety messages by themselves do not eliminate danger and are not a substitute for proper accident prevention measures.
Safety Instructions For Power Tools 9. USE PROPER EXTENSION CORD for the charger. Make sure your extension cord is in good condition. Conductor size should be in accordance with the chart below. The amperage rating should be listed on the motor or tool nameplate. An undersized cord will cause a drop in line voltage resulting in loss of power and overheating. Your extension cord must also contain a ground wire and plug pin. Always repair or replace extension cords if they become damaged.
ADDITIONAL SAFETY INSTRUCTIONS FOR GRINDERS 1. KEEP HANDS AWAY FROM ROTATING PARTS. Never attempt to adjust or stop a tool which has been mounted on the grinder shaft when the tool is turning. 2. HOLD THE TOOL FIRMLY. Always brace yourself against the rotational force of the turning shaft to avoid slipping the tool and possibly causing cuts or abrasions. 3. 4. 5. NEVER USE WATER OR OTHER LUBRICANTS with the grinding tools in this kit. Moisture greatly increases the risk of a shock hazard.
OPERATION Inserting Attachments Your kit comes with a large variety of different attachments ranging from grinding stones, sanding discs and sleeves, buffing pads and carving tools. There are two different collet sizes, 7⁄64" and 1⁄8" diameter. Some of the cutting wheels, polishing tips and other accessories need to be attached or inserted into another shaft or mandrel in order to be used. If you are using one of these, first thread the accessory onto the shaft.
OPERATING TIPS AND MAINTENANCE Operating Tips Maintenance Avoid overloading the grinder. Do not apply excessive pressure to the grinder while using. If the speed drops abnormally, decrease pressure immediately. If the grinder stops abruptly or becomes blocked, release the switch at once. Ensure the safety of the workplace. Clear the work area of all parts and debris that may cause injury by flying objects. Securely fix the object to be worked on in a vise or otherwise clamp to avoid injury.
WARRANTY CARD Name __________________________________________________________ Street __________________________________________________________ City____________________State________Zip_________ Phone Number____________E-Mail___________________FAX____________ MODEL # G8601 Mini Grinder Kit Order _____________________ The following information is given on a voluntary basis. It will be used for marketing purposes to help us develop better products and services.
Send a Grizzly Catalog to a friend: Name________________________________ Street________________________________ City______________State______Zip_______ FOLD ALONG DOTTED LINE GRIZZLY INDUSTRIAL, INC. P.O.
