HOOK & LOOP SANDER/POLISHER MODEL G9910 INSTRUCTION MANUAL COPYRIGHT © 2000 BY GRIZZLY INDUSTRIAL, INC. WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC.
G9910 Hook & Loop Sander/Polisher -2-
SAFETY For Your Own Safety Read Instruction Manual Before Operating This Equipment The purpose of safety symbols is to attract your attention to possible hazardous conditions. This manual uses a series of symbols and signal words which are intended to convey the level of importance of the safety messages. The progression of symbols is described below. Remember that safety messages by themselves do not eliminate danger and are not a substitute for proper accident prevention measures.
Safety Instructions For Power Tools 9. USE PROPER EXTENSION CORD for the tool. Make sure your extension cord is in good condition. Conductor size should be in accordance with the chart below. The amperage rating should be listed on the motor or tool nameplate. An undersized cord will cause a drop in line voltage resulting in loss of power and overheating. Your extension cord must also contain a ground wire and plug pin. Always repair or replace extension cords if they become damaged.
INTRODUCTION Commentary We are proud to offer the Grizzly Model G9910 Hook & Loop Sander/Polisher. The Model G9910 is part of a growing Grizzly family of fine power tools. When used according to the guidelines set forth in this manual, you can expect years of troublefree, enjoyable operation and proof of Grizzly’s commitment to customer satisfaction.
OPERATION INSTRUCTIONS Getting Started Attaching Abrasives After making sure the power source matches the specifications on the sander label, plug in sander. Pull the trigger switch to turn it on, and release the switch to turn the sander off. When you first turn it on, make sure that your finger remains on the switch so you can STOP the sander in case there’s a problem. The sander should run smoothly. Strange or unnatural noises should be investigated and corrected before operating the machine further.
MAINTENANCE General Repair and Service Regular periodic maintenance on your Model G9910 Hook & Loop Sander/Polisher will ensure its optimum performance. Make a habit of inspecting your sander each time you use it. Check for the following conditions and repair or replace when necessary: All quality tools will eventually wear from normal use. Since sander is encased in a double insulated plastic cover, leave repair and service issues to a qualified service technician.
WARRANTY AND RETURNS Grizzly Industrial, Inc. warrants every product it sells for a period of 1 year to the original purchaser from the date of purchase. This warranty does not apply to defects due directly or indirectly to misuse, abuse, negligence, accidents, repairs or alterations or lack of maintenance.
WARRANTY CARD Name __________________________________________________________ Street __________________________________________________________ City____________________State________Zip_________ Phone Number____________E-Mail___________________FAX____________ MODEL # G9910 Hook & Loop Sander/Polisher Order #_____________________ The following information is given on a voluntary basis. It will be used for marketing purposes to help us develop better products and services.
Send a Grizzly Catalog to a friend: Name________________________________ Street________________________________ City______________State______Zip_______ FOLD ALONG DOTTED LINE GRIZZLY INDUSTRIAL, INC. P.O.
