Sander - Oscillating Spindle Sander User Manual

G9922 
-9-
7. ONLY ALLOW TRAINED AND PROP-
ERLY SUPERVISED PERSONNEL TO
OPERATE MACHINERY. Make sure
operation instructions are safe and clearly
understood.
8. KEEP CHILDREN/VISITORS AWAY.
Keep all children and visitors away from
machinery. When machine is not in use,
disconnect it from power, lock it out, or
disable the switch to make it difficult for
unauthorized people to start the machine.
9. UNATTENDED OPERATION. Leaving
machine unattended while its running
greatly increases the risk of an accident or
property damage. Turn machine Off and
allow all moving parts to come to a com-
plete stop before walking away.
10. DO NOT USE IN DANGEROUS
ENVIRONMENTS. DO NOT use machin-
ery in damp, wet locations, or where any
flammable or noxious fumes may exist.
11. KEEP WORK AREA CLEAN AND WELL
LIGHTED. Clutter and dark shadows may
cause accidents.
12. USE A GROUNDED POWER SUPPLY
RATED FOR THE MACHINE AMPERAGE.
Grounded cords minimize shock hazards.
Operating machine on an incorrect size of
circuit increases risk of fire.
13.
ALWAYS DISCONNECT FROM POWER
SOURCE BEFORE SERVICING
MACHINERY. Make sure switch is in
OFF
position before reconnecting.
14. MAINTAIN MACHINERY WITH CARE.
Keep blades sharp and clean for best and
safest performance. Follow instructions for
lubricating and changing accessories.
15. MAKE SURE GUARDS ARE IN PLACE
AND WORK CORRECTLY BEFORE
USING MACHINERY.
Safety Instructions for Machinery
16. REMOVE CHUCK KEYS OR ADJUSTING
TOOLS. Make a habit of never leaving
chuck keys or other adjustment tools in/on
the machine—especially near spindles!
17. DAMAGED MACHINERY. Check for bind-
ing or misaligned parts, broken parts,
loose bolts, other conditions that may
impair machine operation. Always repair or
replace damaged parts before operation.
18. DO NOT FORCE MACHINERY. Work at
the speed for which the machine or acces-
sory was designed.
19. SECURE WORKPIECE. Use clamps or
a vise to hold the workpiece when practi-
cal. A secured workpiece protects your
hands and frees both hands to operate the
machine.
20. DO NOT OVERREACH. Maintain stability
and balance at all times when operating
machine.
21. MANY MACHINES CAN EJECT
WORKPIECES TOWARD OPERATOR.
Know and avoid conditions that cause the
workpiece to "kickback."
22. STABLE MACHINE. Machines that move
during operations greatly increase the
risk of injury and loss of control. Verify
machines are stable/secure and mobile
bases (if used) are locked before starting.
23. CERTAIN DUST MAY BE HAzARDOUS
to the respiratory systems of people and
animals, especially fine dust. Be aware of
the type of dust you are exposed to and
always wear a respirator designed to filter
that type of dust.
24. EXPERIENCING DIFFICULTIES. If at
any time you are experiencing difficulties
performing the intended operation, stop
using the machine! Contact our Technical
Support Department at [phone].