2V CORDLESS VACUUM MODEL H0602 INSTRUCTION MANUAL COPYRIGHT © 2000 BY GRIZZLY INDUSTRIAL, INC. 1821 VALENCIA ST., BELLINGHAM, WA 98227 WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC.
SAFETY For Your Own Safety Read Instruction Manual Before Operating This Equipment The purpose of safety symbols is to attract your attention to possible hazardous conditions. This manual uses a series of symbols and signal words which are intended to convey the level of importance of the safety messages. The progression of symbols is described below. Remember that safety messages by themselves do not eliminate danger and are not a substitute for proper accident prevention measures.
Safety Instructions For Power Tools 9. USE PROPER EXTENSION CORD for the charger. Make sure your extension cord is in good condition. Conductor size should be in accordance with the chart below. The amperage rating should be listed on the motor or tool nameplate. An undersized cord will cause a drop in line voltage resulting in loss of power and overheating. Your extension cord must also contain a ground wire and plug pin. Always repair or replace extension cords if they become damaged.
ADDITIONAL SAFETY 1. 2. 3. 4. 5. 6. Read all instructions and warnings on the battery and charger before charging the battery. Charge only using the supplied charger and battery. Do not use with other batteries, chargers or trim saws. Do not expose battery or charger to wet or rainy conditions. Moisture greatly increases the risk of a shock hazard. Do not touch battery poles with any conductive materials.
INTRODUCTION Commentary We are proud to offer the Grizzly Model H0602 12V Cordless Vacuum. The Model H0602 is part of a growing Grizzly family of fine power tools. When used according to the guidelines set forth in this manual, you can expect years of trouble-free, enjoyable operation and proof of Grizzly’s commitment to customer satisfaction. The Model H0602 12V Cordless Vacuum is equipped with a high velocity motor capable of handling many clean-up jobs.
OPERATIONS Getting Started First review the contents of your cordless tool kit and familiarize yourself with the key components. Cordless Vacuum Battery Pack Charging Stand 3. Occasionally remove and clean the elastic filter sleeve from the inside of the collection chamber. Allow filter to completely dry before using the vacuum. Keeping Tools Clean The battery in your new cordless power tool will not be fully charged when you receive it.
WARRANTY AND RETURNS Grizzly Industrial, Inc. warrants every product it sells for a period of 1 year to the original purchaser from the date of purchase. This warranty does not apply to defects due directly or indirectly to misuse, abuse, negligence, accidents, repairs or alterations or lack of maintenance.
WARRANTY CARD Name __________________________________________________________ Street __________________________________________________________ City____________________State________Zip_________ Phone Number____________E-Mail___________________FAX____________ Model # H0602 12V Cordless Vacuum Order #_______________________ The following information is given on a voluntary basis. It will be used for marketing purposes to help us develop better products and services.
Send a Grizzly Catalog to a friend: Name________________________________ Street________________________________ City______________State______Zip_______ FOLD ALONG DOTTED LINE GRIZZLY INDUSTRIAL, INC. P.O.
