9" ANGLE GRINDER MODEL G9911 INSTRUCTION MANUAL COPYRIGHT © 2000 BY GRIZZLY INDUSTRIAL, INC. 1821 VALENCIA ST., BELLINGHAM, WA 98227 WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC.
G9911 9" Angle Grinder -2-
SAFETY For Your Own Safety Read Instruction Manual Before Operating This Equipment The purpose of safety symbols is to attract your attention to possible hazardous conditions. This manual uses a series of symbols and signal words which are intended to convey the level of importance of the safety messages. The progression of symbols is described below. Remember that safety messages by themselves do not eliminate danger and are not a substitute for proper accident prevention measures.
Safety Instructions For Power Tools 9. USE PROPER EXTENSION CORD for the tool. Make sure your extension cord is in good condition. Conductor size should be in accordance with the chart below. The amperage rating should be listed on the motor or tool nameplate. An undersized cord will cause a drop in line voltage resulting in loss of power and overheating. Your extension cord must also contain a ground wire and plug pin. Always repair or replace extension cords if they become damaged.
INTRODUCTION Commentary We are proud to offer the Grizzly Model G9911 9" Angle Grinder. The Model G9911 is part of a growing Grizzly family of fine power tools. When used according to the guidelines set forth in this manual, you can expect years of trouble-free, enjoyable operation and proof of Grizzly’s commitment to customer satisfaction. The Model G9911 is a 15 amp 9" angle grinder capable of a wide variety of cutting, grinding and polishing.
OPERATIONS Before You Begin Inspect angle grinder before use. The grinding wheel must be free of cracks, chips and breaks. If there are any signs of damage, discard the grinding wheel and replace immediately. Using Your Tool Use extreme caution when operating this tool. Always be aware of your surrounding working area. Be sure to wear appropriate eye protection and be sure to work at a safe distance from others in the area. Be sure to use the appropriate abrasive and cutting wheels with this grinder.
MAINTENANCE Keeping Tools Clean Maintenance Your G9911 will give you years of trouble free service if you keep it clean and free of built-up dust or grime. Ensure that no air passages get blocked. If they do, blow them out with compressed air. WARNING: Wear safety glasses when cleaning tool with compressed air. Regular periodic maintenance on your G9911 will ensure its optimum performance. Make a habit of inspecting your sander each time you use it.
WARRANTY AND RETURNS Grizzly Industrial, Inc. warrants every product it sells for a period of 1 year to the original purchaser from the date of purchase. This warranty does not apply to defects due directly or indirectly to misuse, abuse, negligence, accidents, repairs or alterations or lack of maintenance.
WARRANTY CARD Name __________________________________________________________ Street __________________________________________________________ City____________________State________Zip_________ Phone Number____________E-Mail___________________FAX____________ Model # G9911 9"Angle Grinder Order #_______________________ The following information is given on a voluntary basis. It will be used for marketing purposes to help us develop better products and services.
Send a Grizzly Catalog to a friend: Name________________________________ Street________________________________ City______________State______Zip_______ FOLD ALONG DOTTED LINE GRIZZLY INDUSTRIAL, INC. P.O.
