Parkfield 19 921 English Français Español .....1 .....2 .....3 Parkfield Design & Quality Engineering GROHE Germany 99.0006.031/ÄM 224368/08.
Please pass these instructions on to the end user of the fitting! S.v.
5 250 35 251 35 252 35 253 35 015 2
1 2 I1 D B E1 G C H I E B A A1 3 4 D F 5 K H L M J M1 4 3 3m m M2 J1
English Installation 1. Remove the two screws (A1) from the fitting template (A), then remove the template, see Fig. [1]. 2. Turn the valve stem (B) clockwise to the OFF position. 3. Make sure the water supply is turned on at the service stop valves (C). Stop valves must be in fully open position (slots horizontal) for valve to function. 4. The adjustable hot water limit stop (D) is factory set at neutral position to give maximum outlet temperature, see Figs. [2] and [3].
7 D F 0 D 8 9 C E1 E 5 D1
English Maximum hot water limit setting The adjustable hot water limit stop (D) is factory set in a neutral position (0), see Fig. [6]. On applications requiring to limit the valve opening from full hot position, the factory set adjustable hot water limit stop must be reset as described below. 1. Remove the factory set adjustable hot water limit stop (D), see Fig. [7]. 2. Slide the adapter (E) onto the valve stem (C), by placing the lever stop pin (E1) on top of "Arrow" ↑ (F), see Figs. [6] and [8]. 3.
10 11 H C J J1 M 3m m M2 M1 12 13a P O R O1 N I I2 H 41131275 13b 14 P S 15562040 7 7
English Maintenance Check, clean and if necessary, replace parts. Grease with special valve grease. Pressure balancing cartridge, see Figs. [10] to [14]. 1. Lever out plug (M1) and loosen set screw (M2) with a 3mm allen wrench, see Fig. [10]. 2. Pull off lever (M). 3. Detach screws (J1) and remove escutcheon (J). 4. Shut off hot and cold water stops (C). The slots are vertical when the stops are in the off position, see Fig. [11]. 5.
www.grohe.com Grohe America Inc. 241 Covington Drive Bloomingdale, IL 60108 U.S.A. Technical Services Phone: 630/582-7711 Fax: 630/582-7722 Grohe Canada Inc.