INSTALLATION MANUAL GROHE BLUE® CHILLED AND SPARKLING
GROHE BLUE® C&S BEFORE INSTALLATION Read TPI and new additional installation instruction carefully! New installation instruction is included ex cw 32/2013 2
GROHE BLUE® C&S BEFORE INSTALLATION For installation under the sink: Make sure that the sink base unit has a minimum width of 600mm to accommodate the cooler 3
GROHE BLUE® C&S BEFORE INSTALLATION Sufficient aeritation of the cooler has to be guaranteed! Ventilation grilles for the outgoing air have to be inserted in the cover plate! 4
GROHE BLUE® C&S UNPACKAGING 5
GROHE BLUE® C&S UNPACKING OF COMPONENTS 3. 1. 2. 4. 5. 6.
GROHE BLUE® C&S INSTALLATION – CONNECTION TO COLD WATER – COMPONENT 2 2.
GROHE BLUE® C&S INSTALLATION – COMPONENT 2 Step 2 Step 3 8
GROHE BLUE® C&S INSTALLATION – COMPONENT 2 Step 4 Pay attention to the installation‘s order of tape waterproofness (not supplied) Turn the tape in the direction of the screwing 9
GROHE BLUE® C&S INSTALLATION – COMPONENT 3 3.
GROHE BLUE® C&S INSTALLATION – COMPONENT 3 Step 7 11
GROHE BLUE® C&S INSTALLATION – COMPONENT 4 – STEP 8 4.
GROHE BLUE® C&S INSTALLATION – COMPONENT 3 – STEP 9 13
GROHE BLUE® C&S INSTALLATION OF THE FAUCET – COMPONENTS 5 AND 6 6. Step 10 5 . 6.
GROHE BLUE® C&S INSTALLATION OF THE FAUCET – COMPONENTS 5 AND 6 Step 11 15
GROHE BLUE® C&S INSTALLATION OF THE FAUCET – COMPONENTS 5 AND 6 Step 12 16
GROHE BLUE® C&S INSTALLATION OF THE FAUCET – COMPONENTS 5 AND 6 Step 13 17
GROHE BLUE® C&S INSTALLATION OF THE FAUCET – COMPONENTS 5 AND 6 Step 14 Step 15 Step 16 Step 17 18
GROHE BLUE® C&S INSTALLATION OF THE FAUCET – COMPONENTS 5 AND 6 Step 18 Step 19 19
GROHE BLUE® C&S INSTALLATION OF THE FAUCET – COMPONENTS 5 AND 6 Step 20 Step 21 20
GROHE BLUE® C&S PREPERATION OF THE COOLER – STEP 22 21
GROHE BLUE® C&S INSTALLATION OF THE FILTER – STEP 23 22
GROHE BLUE® C&S INSTALLATION OF THE FILTER - STEP 24 23
GROHE BLUE® C&S INSTALLATION OF THE FILTER – STEP 25 24
GROHE BLUE® C&S INSTALLATION OF THE FILTER – STEP 26 25
GROHE BLUE® C&S INSTALLATION OF THE FILTER – STEP 27 26
GROHE BLUE® C&S INSTALLATION OF THE FILTER – STEP 28 27
GROHE BLUE® C&S INSTALLATION OF THE FILTER - STEP 29 28
GROHE BLUE® C&S INSTALLATION OF THE FILTER – STEP 30 29
GROHE BLUE® C&S CONNECTION OF THE COOLER – STEP 31 assemble data connection cable 30
GROHE BLUE® C&S CONNECTION WATER HOSE FAUCET TO COOLER – STEP 32 31
GROHE BLUE® C&S CONNECTION OF THE COOLER – STEP 33 Step 34 Connect the 230 V plug 32
GROHE BLUE® C&S ADJUSTMENT OF THE FILTERHEAD ACCORDING TO WATER HARDNESS CHART – STEP 34 33
GROHE BLUE® C&S ADJUSTMENT OF THE ELECTRONIC ACCORDING TO WATER HARDNESS CHART – STEP 35 1x keep pushed for 3 sec Press 1x to change value / Keep pressed for 3 sec to save 34
GROHE BLUE® C&S FILLING THE TANK WAS WATER – STEP 36 Now open the faucet in medium sparkling water position, so that the cooler tank gets completely filled with water.
GROHE BLUE® C&S CONNECTION OF CO2 BOTTLE HOLDER – STEP 37 36
GROHE BLUE® C&S CONNECTION OF CO2 BOTTLE – STEP 38 Please be aware that only parts which are recommended by GROHE have to be installed! It is only allowed to run GROHE BLue C&S with 425gr or 2kg CO2 bottles! 37
GROHE BLUE® C&S CONNECTION OF CO2 BOTTLE – STEP 39 38
GROHE BLUE® C&S CONNECTION OF CO2 BOTTLE – STEP 40 39
GROHE BLUE® C&S CONNECTION OF CO2 BOTTLE – STEP 41 40
GROHE BLUE® C&S CONNECTION OF CO2 BOTTLE – STEP 42 41
GROHE BLUE® C&S FINAL STEP – STEP 43 After connecting the CO2 bottle to the GROHE Blue system the installation is finished. The cooler now needs about 20-30 minutes to cool down the water. After that please tap 1-2 carafes in full sparkling water position until the CO2 bubbles are visible in the water.
