GROHE MINTA TOUCH installation manual (USA) 12.06.
GROHE MINTA TOUCH ARTICLE # 31359 INSTALLATION MANUAL Tools Required Materials Required (not included) (not included) Wrench 11/16” (17 mm) Wrench 3/4” (19 mm) Wrench 7/8” (22 mm) Wrench 15/16” (24 mm) Phillips screwdriver 12.6.13 4 screws to attach the control unit to back or side cabinet wall Please use screws of appropriate length and type for mounting surface.
GROHE MINTA TOUCH ARTICLE # 31359 INSTALLATION MANUAL Spare Parts (availaible for order) Pos. # Prod. description Order # Units per package 1 2 3 4 4.1 4.2 Lever Cap Cartridge Pull out spray Non-return valve Flow straightener 46015 000 46025 000 46048 000 46857 000 08565 000 13997 000 1 1 1 1 1 1 6 7 8 9 9.1 9.
GROHE MINTA TOUCH ARTICLE # 31359 INSTALLATION MANUAL Dimensional drawing 12.6.
GROHE MINTA TOUCH ARTICLE # 31359 INSTALLATION MANUAL Operational drawings operated with lever handle function (mixed water) operated with touch function (cold water only) mixed water from cartridge cold water for touch operation 12.6.
GROHE MINTA TOUCH ARTICLE # 31359 INSTALLATION MANUAL step 1 Keep a minimum distance of 3 inches (75 mm) from the faucet hole to the back wall. < 60 When the distance is less than 3 inches (75 mm), a shorter lever is available (40 684) The faucet can be positioned with the lever on the left, right or in front. Maximum thickness of countertop: 2 5/16 inches (60 mm) Minta Short Lever Handel (Available May 2014) 406 84 000 406 84 DC0 12.6.
GROHE MINTA TOUCH ARTICLE # 31359 INSTALLATION MANUAL step 2 The flexible hoses must not be stretched, or twisted! step 3 Insert the brass threaded shank through the faucet body. 12.6.
GROHE MINTA TOUCH ARTICLE # 31359 INSTALLATION MANUAL step 4 1 Guide the escutcheon, insulating sleeve and O-ring over the flexible connection hoses and place them at the bottom of the faucet body. 2 Then guide the flexible hoses and the threaded rod through the mounting hole. 2 1 v TIP: Move the white sleeves of the connection hoses one by one in order to make it through the escutcheon, insulating sleeve and faucet hole. Remember to slide back the sleeves into place.
GROHE MINTA TOUCH ARTICLE # 31359 INSTALLATION MANUAL 1 step 5 5 2 Install the mounting kit to the threaded shank (underneath the countertop). TIP: Slide the white sleeves (between copper pipe and flexible hose) one by one through the mounting ring. Remember to slide back the sleeves into place! 1 2 Place the mounting tool on top of the brass threaded shank and turn it clockwise. At the same time keep the faucet body in position and fixed to the countertop.
GROHE MINTA TOUCH ARTICLE # 31359 INSTALLATION MANUAL step 7 7 1 Install the chrome T-connector on the cold water angle valve. 1. 2 5 1 4 kw ww 3 2. 2 Connect the cold water hose (blue label) from the faucet with the top of the chrome T-connector. 3 Connect the flexible hose (with the angled coupling) with the straight 3. edge on the chromed T-connector. 4 Connect the hot water hose (with red label) of the faucet to the hot 4. water angle valve.
GROHE MINTA TOUCH ARTICLE # 31359 INSTALLATION MANUAL step 8 Install the control box within 12 inch's of the faucet mounting set so that the battery is accessible! *4 screws not included. Please use screws of approprate length and type for mounting surface. step 1 Connect the brass T-connector with the control box. 2 Connect the brass T-connector to the mixed water supply hose from the faucet hose. (unlabeled) 9 1 2 12.6.
GROHE MINTA TOUCH ARTICLE # 31359 INSTALLATION MANUAL step 10 Connect the flexible hose with the angled coupling to the control box. NOTE: Ensure that the hose is not in contact with copper pipes, other hoses or other parts of the faucet. step 1 Install the red coupling on the extendable hose from the pull out spray. 2 Connect red coupling to brass T-connector 11 2 12.6.
GROHE MINTA TOUCH ARTICLE # 31359 INSTALLATION MANUAL step 12 Connect the cable from the control box to the faucet. step 13 Install the weight on the pullout hose. 12.6.
GROHE MINTA TOUCH ARTICLE # 31359 INSTALLATION MANUAL step 14 14 Fasten the balancing cable What type of sink do you have ? Is the sink basin metal? No Yes Fasten balancing cable to the underside of the sink Complete proceed to step 17 Skip to step 15 12.6.
GROHE MINTA TOUCH ARTICLE # 31359 INSTALLATION MANUAL step 15 15 Fasten the balancing cable Is there a garbage disposal present? No Yes Fasten balancing cable to a metal section of the garbage disposal Complete proceed to step 17 Skip to step 16 12.6.
GROHE MINTA TOUCH ARTICLE # 31359 INSTALLATION MANUAL step 15 16 Fasten the balancing cable Is there an undersink dishwasher? No Yes Fasten the balancing cable to a metal section of the dishwasher Complete proceed to step 17 Fasten the balancing cable to the cold water supply line Complete proceed to step 17 12.6.
GROHE MINTA TOUCH ARTICLE # 31359 INSTALLATION MANUAL step 15 17 1 Turn on water first (IMPORTANT) 2 Insert the included battery to begin configuration. Do not touch the faucet, sink, or connections for 1 minute after the battery is installed! 3 Install the cover plate properly 2 3 End 12.6.
GROHE MINTA TOUCH ARTICLE # 31359 INSTALLATION MANUAL FAQ Touch Sensitivity function The sensitivity of the Touch function varies depending on the ambient temperature and humidity. There are five sensitivity levels. Level 3 is pre-set by the factory. Highest sensitivity level is 5. By touching the faucet with bare skin on the gray fields, cold water can be activated without operating the handle.
GROHE MINTA TOUCH ARTICLE # 31359 INSTALLATION MANUAL FAQ Faucet cleaning (cleaning mode) To enable the cleaning mode, the touch operation must first be disabled. • Briefly press the AQUA STOP button. A small burst of water will flow to indicate that the cleaning mode has been activated. • The light blinks twice repeatedly for two minutes. • For 2 minutes, the touch function is deactivated, and afterwards it will automatically switch on again. 12.6.
