Instructions / Assembly
East Bethel, MN USA 763-753-7374
Continued
1
Parts Identifi cation Box 1
Remove contents from Box 1 of 2.
Stack matching pieces in piles. Using the
parts list, locate and count the individual
pieces and verify that you have received
the correct number of pieces.
If any pieces are missing or replacement
parts are required, contact Gronomics at
1-855-299-6727.
NOTE: It is recommended to place a
protective layer between the ground and
the pieces during assembly. This will help
prevent damage to the pieces.
2
13
13
14
14
15
15
18
18
19
19
3
7
4
5
6
Box 1 of 2
ITEM QTY. PART # DESCRIPTION
1 2 NASR11 Nesting Angle Side Rail, 11-1/2” x 4-1/2”
2 4 NSR11.5 Nesting Side Rail, 11-1/2” x 5-1/2”
3 4 NSR12 Nest Side Rail, 11-5/8” x 4”
4
4 N/A Screw, #8 x 3/4”
5 2 R48-234ZY Screw, GRK #8 x 2-3/4”
6 1 N/A
Ramp Hook
7 2 NP12 Nesting Post, 12-3/8” x 1-7/8”
8 4 NP15 Nesting Post, 15-1/4” x 1-7/8”
9 2 CBP37 Rear Post, 36-3/4” x 3-1/4”
10 2 CBNB41 Bottom Notched Board, 40-7/8” x 5-1/4”
11 2 CBB41 Bottom Board, 40-7/8” x 5-1/4”
12 2 CBRB41 Bottom Ripped Board, 40-7/8” x 3-5/8”
13 6 CS40 Coop Side Board, 40” x 5-3/8”
14 1 CFRONT40 Front Cleat Side Rail, (w/Logo), 40” x 4”
15 1 CBACK40 Back Cleat Side Rail, 40” x 4”
16 1 ACS12 Angled Coop Side RH, 12-1/2 ” x 14-5/8”
17 1 ACS12 Angled Coop Side LH, 12-12” x 14-5/8”
18 1 RAMP Ramp, 39-3/4” x 11”
19 1 RR41 Roost Rod, 40-3/4” x 1-1/4”
20 2 RRH2 Roost Rod Holder
Chicken Coop Pet Cottage
4’W x 4’D x 4’ 2”H Assembly Instruction
DCCPC 4-4
12
12
10
10
11
11
9
8
Packaged & Inspected by: Date:
1
16
16
17
17
20
20
Torx® T15
Phillips