Instructions / Assembly

East Bethel, MN USA 763-753-7374
Continued
23
23
4
Screen Panel Assembly Continued
Align a screen panel (Item 22 or Item 23) with the screw heads facing
in. Align the screen panel tabs with the post slots and slide the screen
panel down on both posts.
23
23
5
Screen Panel Assembly Continued
Position a screen panel (Item 22 or 23) (screw heads facing away
from you) between the two previously installed screen panels.
Position the 36-3/4” posts (Item 9) with the fl at end (straight cut)
towards the ground, make sure the top of the post tapered cut is
slopped towards you.
Align the screen panel tabs with the post slots and slide the posts
down.
23
23
6
Side Rail And Coop Side Board Assembly
Install the front cleat side rail (w/Logo) (Item 14) (with the cleat located
at the bottom and facing in) between the two 47-3/4” posts and slide
down.
Install the back cleat side rail (Item 15) (with the cleat located at the
bottom and facing in) between the two 36-3/4”posts and slide down.
Install four 40” x 5-3/8” coop side boards (Item 13) between the posts
and slide down.
15
15
7
Roost Floor Assembly
Install the 40-7/8” x 5-1/4” bottom notched boards (Item 10), 40-7/8”
x 3-5/8” bottom ripped boards (Item 12), and 40-7/8” x 5-1/4” bottom
boards (Item 11) as shown on each side of the chicken coop.
10
10
10
10
12
12
12
12
11
11
11
11
14
14
13
13
13
13
9
9