Instructions / Assembly

www.gronomics.com East Bethel, MN USA 763-753-7374
Continued
Parts List
ITEM QTY. PART # DESCRIPTION
1 1 2003 Fabric Liner, 36” x 52”
2 4 3100 Post Cap, 4” x 4” x 1-1/2”
3 2 1201 Corner Notched Bottom Board, 22” x 5-1/2” x 1”
4 6 1200 Bottom Board, 22” x 5-1/2” x 1”
5 4 7007 Side Rail, 21” x 5-1/2” x 1”
6 2 4501, 4501L Side Rail (one w/Logo), 45” x 5-1/2” x 1”
7 2 7011 Side Rail w/Cleat, 45” x 5-1/2” x 1”
8 4 7012 Corner Post, 4” x 4” x 30” w/11” Dovetail Depth
1
Parts Identifi cation
Stack matching pieces in piles. Using the parts list, locate
and count the individual pieces and verify that you have
received the correct number of pieces.
If any pieces are missing or replacement parts are
required, contact Gronomics at 1-855-299-6727.
NOTE: It is recommended to place a protective layer
between the ground and the pieces during assembly. This
will help prevent damage to the pieces.
Elevated Garden Bed (24” x 48”)
Assembly Instruction
ITEM #: EGB 24-48
ITEM #: EGB 24-48S
5
6
8
3
4
7
1
2
Packaged & Inspected by: Date:
Side Rail Assembly
2
Stand two 4” x 4” x 30” corner posts (Item 8) upright with slots facing you
and slots facing each corner post.
Locate a 45” x 5 1/2 “ side rail w/cleat (Item 7). With cleat located at the
bottom and facing you, install side rail w/cleat into the slots and slide down
to the bottom of the slots.
Repeat procedure for the two remaining corner posts and 45” x 5-1/2 “ side
rail w/cleat.
(Soil depth option: Cleats located as shown will provide a soil depth of
approximately 8”. Reverse side rail w/cleat installation, cleats located at top,
if a soil depth of approximately 6” is desired).
7
Cleat
8 8