Instructions / Assembly

www.gronomics.com East Bethel, MN USA 763-753-7374
Continued
Parts List
ITEM QTY. PART # DESCRIPTION
1 4 3201 Corner Post, 4” x 4” x 32”
2 2 4502T Side Rail w/Cleat, 45” x 5-1/2” x 1”
3 4 2100T Side Rail, 21” x 5-1/2” x 1”
4 2 4501T Side Rail Narrow Center, 45” x 5-1/2” x 1
5 2 2101T Side Rail Narrow Center, “21” x 2-1/2” x 1”
6 2 4500T, L4500T Side Rail (one w/Logo), 45” x 5-1/2” x 1”
7 2 1201 Corner Notched Bottom Board, 22” x 4-1/2” x 1”
8 6 1200 Bottom Board, 22” x 4-1/2” x 1”
9 1 3100 Post Cap, 4” x 4” x 1-1/2”
10 4 F3652 Fabric Liner, 36” x 52”
1
Parts Identifi cation
Stack matching pieces in piles. Using the parts list, locate
and count the individual pieces and verify that you have
received the correct number of pieces.
If any pieces are missing or replacement parts are
required, contact Gronomics at 1-855-299-6727.
NOTE: It is recommended to place a protective layer
between the ground and the pieces during assembly. This
will help prevent damage to the pieces.
Elevated Garden Bed (24” x 48”)
Assembly Instruction
EGBD 24-48
EGBD 24-48S
5
6
8
9
3
4
7
1
10
10
Packaged & Inspected by: Date:
2
Side Rail Assembly
2
Stand two 4” x 4” x 32” corner posts (Item 1) upright with slots facing you
and slots facing each corner post.
Locate a 45” x 5 1/2 “ side rail w/cleat (Item 2). With the cleat located at the
bottom and facing you, install side rail w/cleat into the slots and slide down
to the bottom of the slots.
Repeat procedure for the two remaining corner posts and 45” x 5-1/2 “ side
rail w/cleat.
Cleat
1 1
2