Instructions / Assembly

www.gronomics.com East Bethel, MN USA 763-753-7374

Planter Bench Assembly 5

Place the planter bench (Item 14) onto the side rail

w/double cleats (as shown).

Install the GRK R4 screws (Item 18) into the pre-

drilled holes at each end of the planter bench and

tighten.

Post Cap Assembly

Remove the rubber cap from the post stud.

Align the hole of the 4” x 4” post cap (Item 12) with

stud and tighten until the cap makes contact with the

post.

NOTE: Do not overtighten.

Repeat procedure for all posts.

Rubber Cap

Stud