Instructions / Assembly

ManualsBrandsGronomics ManualsKitchen82 in. x 24 in. Safe Finish Cedar Bench Planter

www.gronomics.com East Bethel, MN USA 763-753-7374

Continued

Planter Bench

Assembly Instruction

Parts Identiﬁ cation Box 1

Stack matching pieces in piles.

Using the parts list, locate and

count the individual pieces and

verify that you have received the

correct number of pieces.

If any pieces are missing or

replacement parts are required,

contact Gronomics at 1-855-299-

6727.

NOTE: It is recommend to place

a protective layer between the

ground and the pieces during

assembly. This will help prevent

damage to the pieces.

Parts List Box 1 of 2

ITEM QTY. PART # DESCRIPTION

1 1 7003-Lt Three Sided Dovetail Corner Post (Left) 4” x 4” x 36”

2 1 7003-Rt Three Sided Dovetail Corner Post (Right) 4” x 4” x 36”

3 6 7009 Post w/13” Dovetail Depth 4” x 4” x 30”

4 1 7004-Rt Side Rail w/Double Cleat (Right) 21” x 5-1/2” x 1”

5 1 7004-Lt Side Rail w/Double Cleat (Left) 21” x 5-1/2” x 1”

6 2 7005 Side Rail w/Cleat 21” x 5-1/2” x 1”

7 4 7007 Side Rail 21” x 5-1/2” x 1”

8 2 1450 Side Rail 14-1/2” x 5-1/2” x 1”

9 4 1451 Narrow Center Side Rail 14-1/2” x 2-1/2” x 1”

10 2 1551 Corner Notched Bottom Board 15-1/2” x 4-1/2” x 1”

11 4 1550 Bottom Board 15-1/2” x 5-1/2” x 1”

12 8 3100 Post Cap 4-1/2” x 4-1/2” x 1-1/2”

13 2 2002 Fabric Liner 22” x 36”

EPB 24-82

EPB 24-82S

Packaged & Inspected by: Date:

Summary of content (8 pages)

PAGE 1
Planter Bench Assembly Instruction 1 EPB 24-82 EPB 24-82S Parts Identification Box 1 Stack matching pieces in piles. Using the parts list, locate and count the individual pieces and verify that you have received the correct number of pieces. If any pieces are missing or replacement parts are required, contact Gronomics at 1-855-2996727. 3 1 2 4 5 6 7 12 8 9 10 11 NOTE: It is recommend to place a protective layer between the ground and the pieces during assembly.
PAGE 2
Parts Identification Box 2 Using the parts list, locate and count the individual pieces and verify that you have received the correct number of pieces. 14 15 16 8 If any pieces are missing or replacement parts are required, contact Gronomics at 1-855-2996727. 17 10 18 NOTE: It is recommend when to place a protective layer between the ground and the pieces during assembly. This will help prevent damage to the pieces. ITEM 14 15 16 8 17 10 18 QTY.
PAGE 3
Planter Bench Backrest Assembly 1 NOTE: The posts slots must be positioned as shown. 2 Lay the 4” x 4” x 36” three sided dovetail corner post (left) (Item 1) on the ground (as shown). Lay the 4” x 4” x 36” three sided dovetail corner post (right) (Item 2) on the ground (as shown). Curved Dovetail Slot Locate a 45” x 5-1/2” side rail (Item 15). Install the side rail into the curved dovetail slots and slide to the bottom of the slots.
PAGE 4
5 Planter Bench / Planter Box Assembly Stand the backrest assembly up (as shown). The backrest should be slanted out at the top Locate a 4” x 4” x 30” post (Item 3). Stand the post up with slot facing out and slot facing the backrest assembly. Install the 21” x 5-1/2” side rail w/double cleat (left) (Item 5) (cleats located at the bottom) into the slots on the posts and slide down to the bottom of the slots.
PAGE 5
7 Planter Box Assembly Stand a 4” x 4” x 30” post (Item 3) up with slot facing the 36” post and slot facing you. 3 8 Install the 14-1/2” x 5-1/2” side rail (Item 8) into the slots on the posts and slide down to the bottom of the slots. 8 Planter Box Assembly Continued Stand a 4” x 4” x 30” post (Item 3) up with slots facing each post.
PAGE 6
Planter Box Assembly Continued Planter Box Assembly Continued 9 17 Install the 14-1/2” x 2-1/2” narrow center side rails (Item 9) into the slots on the posts and slide down. 9 17 Install the 21” x 2-1/2” narrow center side rails (Item 17) into the slots on the posts and slide down. 10 Planter Box Assembly Continued 7 Install the 14-1/2” x 5-1/2” side rails (Item 8) into the slots on the posts and slide down.
PAGE 7
11 Corner Notched Bottom Board Assembly 10 Place one 15-1/2” x 4-1/2” corner notched bottom board (Item 10) on each end of the planter box. 12 Bottom Board and Fabric Installation Place two 15” x 5-1/2” bottom boards (Item 11) into the planter box. (Gap boards evenly to allow for water drainage). 11 Repeat steps 7 - 12 for planter box on opposite end of planter bench backrest. Locate the two pieces of fabric liner. Place one piece in the bottom of each planter box. Soil Capacity: 4.
PAGE 8
13 Planter Bench Assembly 5 Place the planter bench (Item 14) onto the side rail w/double cleats (as shown). Install the GRK R4 screws (Item 18) into the predrilled holes at each end of the planter bench and tighten. 14 18 14 Post Cap Assembly Remove the rubber cap from the post stud. Rubber Cap Align the hole of the 4” x 4” post cap (Item 12) with stud and tighten until the cap makes contact with the post. 12 NOTE: Do not overtighten. Repeat procedure for all posts. www.gronomics.