Instructions / Assembly

WWW.gronomics.com East Bethel, MN USA

763-753-7374

Maintenance Free Raised Garden Bed

(24”x48”x18”) Assembly Instruction

Continued

Parts List

ITEM QTY. PART # DESCRIPTION

1 4 MF1750 Corner Post, 4" x 4" x 17.5"

23 MF4150 Side Rail, 41.5” x 8.25" x 1"

31 MF4150L Side Rail w/ Logo 41.5" x 8.25" x 1"

44 MF1800 Side Rail, 18" x 8.25" x 1"

54 MF4040 Post Cap, 4" x 4" x 1-1/2"

68 LP1700 Locking Pin 16"-L

Stack matching pieces in piles. Using the parts list,

locate and count the individual pieces and verify that

you have received the correct number of pieces.

If any pieces are missing or replacement parts are

required, contact Gronomics at 1-855-299-6727.

NOTE: It is recommended to place a protective layer

between the ground and the pieces during assembly.

This will help prevent damage to the pieces.

NOTE: Ground preparation is optional, however we

recommend leveling area under frame of product, or

place product directly on a flat level surface before

filling with soil.

Parts Identification

Item #: MFRGB 24-48-18

Packaged & Inspected by: Date:

Side Rail Assembly

Stand one 4" x 4" x 17.5" corner post (Item 1)

upright with slots facing you and slots facing to

the right.

Install the 41.5” x 8.25" x 1" side rail (Item 2) side

rail into the lower slot and push inward until the

lock pin hole of the side rail w/cleat is inside the

corner post.

Slide the 41.5' x 8.25" x 1" side rail w/Logo (Item

3) into the slot on the corner post until the lock

pin hole of the side rail w/Logo is inside the

corner post. Install locking pin (Item 6) through

the locking pin hole of the side rail w/Logo and

the side rail.

Lower Slot

Logo Facing Away

Edit 8/30/2016

PAGE 1
Maintenance Free Raised Garden Bed (24”x48”x18”) Assembly Instruction 1 Parts Identification Item #: MFRGB 24-48-18 2 Stack matching pieces in piles. Using the parts list, locate and count the individual pieces and verify that you have received the correct number of pieces. 3 1 5 If any pieces are missing or replacement parts are required, contact Gronomics at 1-855-299-6727. 4 NOTE: It is recommended to place a protective layer between the ground and the pieces during assembly.
PAGE 2
3 5 Side Rail Assembly Continued Align the 4" x 4" x 17.5" corner post (Item 1) with slots facing you and slots facing the ends of the 41.5” x 8.25" x 1" side rail (Item 2) and 41.5” x 8.25" x 1" side rail w/ Logo (Item 3). Slide the corner post onto the side rails until the lock pin hole of the side rails are inside the corner post. Install locking pin through the locking pin hole of the side rail w/Logo and the side rail w/cleat.