Instructions / Assembly

WWW.gronomics.com East Bethel, MN USA

763-753-7374

Maintenance Free Raised Garden Bed

(48” x 48” x 9) Assembly Instruction

Continued

Parts List

ITEM QTY. PART # DESCRIPTION

1 4 MF9500 Corner Post, 4" x 4" x 9.5"

21MF4150L Side Rail w/ Logo 41.5" x 8.25" x 1"

33 MF4150 Side Rail, 41.5” x 8.25" x 1"

44 MF4040 Post Cap, 4" x 4" x 1-1/2"

58 LP9000 Locking Pin 8"-L

Stack matching pieces in piles. Using the parts list,

locate and count the individual pieces and verify that

you have received the correct number of pieces.

If any pieces are missing or replacement parts are

required, contact Gronomics at 1-855-299-6727.

NOTE: It is recommended to place a protective layer

between the ground and the pieces during assembly.

This will help prevent damage to the pieces.

NOTE: Ground preparation is optional, however we

recommend leveling area under frame of product, or

place product directly on a flat level surface before

filling with soil.

Parts Identification

Item #: MFRGB 48-48-9

Packaged & Inspected by: Date:

Side Rail Assembly

Stand two 4" x 4" x 9.5" corner posts (Item 1) with

slots facing each post and slots facing toward

you.

Slide the 41.5" x 8.25" x 1" side rail w/Logo (Item

2) into the slot on the corner posts until the lock

pin holes of the side rail w/Logo are inside the

corner posts. Install locking pins (Item 5) through

the locking pin hole of the side rail w/Logo.

Repeat procedure for the two remaining corner

posts and a

41.5" x 8.25" x 1" side rail.

Slot

Edit 8/30/2016

PAGE 1
Maintenance Free Raised Garden Bed (48” x 48” x 9) Assembly Instruction 1 Parts Identification Item #: MFRGB 48-48-9 3 Stack matching pieces in piles. Using the parts list, locate and count the individual pieces and verify that you have received the correct number of pieces. 1 2 5 If any pieces are missing or replacement parts are required, contact Gronomics at 1-855-299-6727. NOTE: It is recommended to place a protective layer between the ground and the pieces during assembly.
PAGE 2
3 Side Rail Assembly Continued Install the side rails 41.5" x 8.25" x 1" (Item 3) into the slots on the corner posts until the lock pin holes of the side rails are inside the corner posts. Install locking pins through the locking pin holes of the side rails. 3 4 Final Assembly Install the 4” x 4” x 1-1/2” post caps (Item 4) onto the corner posts. 4 WWW.gronomics.