Instructions / Assembly

WWW.gronomics.com East Bethel, MN USA

763-753-7374

Maintenance Free Raised Garden Bed

(48” x 91” x 18”) Assembly Instruction

Continued

Parts List

ITEM QTY. PART # DESCRIPTION

1 4 MF1750 Corner Post, 4" x 4" x 17.5"

22 MF1751 Center Post, 4" x 4" x 17.5"

311 MF4150 Side Rail, 41.5” x 8.25" x 1"

42MF4150L Side Rail w/ Logo 41.5" x 8.25" x 1"

514 LP1700 Locking Pin 16"-L

66 MF4040 Post Cap, 4" x 4" x 1-1/2"

Stack matching pieces in piles. Using the parts list,

locate and count the individual pieces and verify that

you have received the correct number of pieces.

If any pieces are missing or replacement parts are

required, contact Gronomics at 1-855-299-6727.

NOTE: It is recommended to place a protective layer

between the ground and the pieces during assembly.

This will help prevent damage to the pieces.

NOTE: Ground preparation is optional, however we

recommend leveling area under frame of product, or

place product directly on a flat level surface before

filling with soil.

Parts Identification

Item #: MFRGB 48-91-18

Packaged & Inspected by: Date:

Side Rail Assembly

Stand one 4" x 4" x 17.5" corner post (Item 1)

upright with slots facing you and slots facing to

the right.

Install the 41.5” x 8.25" x 1" side rail (Item 3) side

rail into the lower slot and push inward until the

lock pin hole of the side rail is inside the corner

post.

Slide the 41.5” x 8.25" x 1" side rail (Item 3) into

the slot on the corner post until the lock pin hole

of the side rail is inside the corner post. Install

locking pin (Item 5) through the locking pin hole

of the side rails.

Lower Slot

Edit 8/30/2016

PAGE 1
Maintenance Free Raised Garden Bed (48” x 91” x 18”) Assembly Instruction 1 Parts Identification Item #: MFRGB 48-91-18 3 Stack matching pieces in piles. Using the parts list, locate and count the individual pieces and verify that you have received the correct number of pieces. 4 1 If any pieces are missing or replacement parts are required, contact Gronomics at 1-855-299-6727. 2 5 NOTE: It is recommended to place a protective layer between the ground and the pieces during assembly.
PAGE 2
3 5 Side Rail Assembly Continued Center Post Assembly Align the 4" x 4" x 17.5" corner post (Item 1) with slots facing you and slots facing the ends of the 41.5” x 8.25" x 1" side rails (Item 3). Stand two 4" x 4" x 17.5" center posts (Item 2) upright with two slots facing you and two slots away from you and one slot facing to the other center post. Slide the corner post onto the side rails until the lock pin hole of the side rails are inside the corner post.
PAGE 3
7 Completed Assembly Install the 4” x 4” x 1-1/2” post caps (Item 6) onto the corner posts. 6 WWW.gronomics.