Instructions / Assembly

WWW.gronomics.com East Bethel, MN USA 763-753-7374
Continued
Align the 4" x 4" x 17.5" corner post (Item 1) with slots
facing you and slots facing the ends of the 41.5” x 8.25"
x 1" side rails (Item 3).
Slide the corner post onto the side rails until the lock
pin hole of the side rails are inside the corner post.
Install locking pin through the locking pin hole of the
side rail w/Logo and the side rail.
Side Rail Assembly Continued
3
1
3
Align two 41.5” x 8.25" x 1" side rails (Item 3 & 4) into
each of the 4" x 4" x 17.5" corner post slots.
Slide the side rails into the corner post slots until the
lock pin hole of the side rail is inside the corner post.
Install locking pin through the locking pin hole of the
side rails.
Repeat steps 1 - 4 for the two remaining 4" x 4" x 17.5"
corner posts, one remaining 41.5” x 8.25" x 1" side rail
w/Logo and five remaining 41.5” x 8.25" x 1" side rails.
NOTE: Install the 41.5” x 8.25" x 1" side rails w/Logo so
the logos will be side by side when the assembly is
completed.
Side Rail Assembly Continued
4
3
3
4
Logo Facing Away
Stand two 4" x 4" x 17.5" center posts (Item 2) upright
with two slots facing you and two slots away from you
and one slot facing to the other center post.
Install the 41.5” x 8.25" x 1" side rail (Item 3) side rail
into the slots (as shown) and push inward until the lock
pin hole is inside the center post.
Install locking pin through the locking pin hole of the
side rails.
Center Post Assembly
5
3
2
Install the center post assembly onto the open end of
the side rail assembly, until the 41.5" x 8.25" x 1" side
rails (Items 3 & 4) lock pin holes are inside the center
post.
Repeat step 6 for the second side rail and corner post
assembly.
Center Post Assembly Continued
6
4
3
Center Post Assembly
3