Instructions / Assembly

WWW.gronomics.com East Bethel, MN USA

763-753-7374

Maintenance Free Raised Garden Bed

(48” x 91” x 9”) Assembly Instruction

Continued

Parts List

ITEM QTY. PART # DESCRIPTION

1 4 MF9500 Corner Post, 4" x 4" x 9.5"

22 MF9501 Center Post, 4" x 4" x 9.5"

35 MF4150 Side Rail, 41.5” x 8.25" x 1"

42MF4150L Side Rail w/ Logo 41.5" x 8.25" x 1"

514 LP9000 Locking Pin 8"-L

66 MF4040 Post Cap, 4" x 4" x 1-1/2"

Stack matching pieces in piles. Using the parts list,

locate and count the individual pieces and verify that

you have received the correct number of pieces.

If any pieces are missing or replacement parts are

required, contact Gronomics at 1-855-299-6727.

NOTE: It is recommended to place a protective layer

between the ground and the pieces during assembly.

This will help prevent damage to the pieces.

NOTE: Ground preparation is optional, however we

recommend leveling area under frame of product, or

place product directly on a flat level surface before

filling with soil.

Parts Identification

Item #: MFRGB 48-91-9

Packaged & Inspected by: Date:

Side Rail Assembly

Stand one 4" x 4" x 9.5" corner post (Item 1)

upright with slot facing you and slot facing to the

right.

Slide the 41.5” x 8.25" x 1" side rail (Item 3) into

the slot on the corner post until the lock pin hole

of the side rail w/Logo is inside the corner post.

Install locking pin (Item 5) through the locking pin

hole of the side rails.

Edit 8/30/2016

PAGE 1
Maintenance Free Raised Garden Bed (48” x 91” x 9”) Assembly Instruction 1 Parts Identification Item #: MFRGB 48-91-9 3 Stack matching pieces in piles. Using the parts list, locate and count the individual pieces and verify that you have received the correct number of pieces. 4 1 If any pieces are missing or replacement parts are required, contact Gronomics at 1-855-299-6727. 5 2 NOTE: It is recommended to place a protective layer between the ground and the pieces during assembly.
PAGE 2
3 5 Side Rail Assembly Continued Align the 4" x 4" x 9.5" corner post (Item 1) with slot facing you and slot facing the ends of the 41.5” x 8.25" x 1" side rail (Item 3). Slide the corner post onto the side rails until the lock pin hole of the side rail is inside the corner post. Install locking pin through the locking pin hole of the side rail. 1 Center Post Assembly Stand two 4" x 4" x 17.
PAGE 3
7 Completed Assembly Install the 4” x 4” x 1-1/2” post caps (Item 6) onto the corner posts. 6 WWW.gronomics.
PAGE 4
WWW.gronomics.