Instructions / Assembly

www.gronomics.com East Bethel, MN USA 763-753-7374
6
Bottom Board and Fabric Installation
Place one 15” x 5-1/2” corner notched bottom board (Item 8) on each
end of the planter box.
Place the four 15” x 5-1/2” bottom boards (Item 7) into the planter box.
(Gap boards evenly to allow for water drainage).
Install fabric liner into the planter box.
Soil Capacity: 3 Cubic Feet
3
End Side Rail Assembly
Install the two 14-1/2” x 5-1/2” side rails (Item 5) into the slots and slide
to the bottom of the slots.
4
Narrow Center Side Rail Assembly
Install the two 31” x 2-1/2” narrow center side rails (Item 4) into the slots
and slide down.
Install the two 14-1/2” x 2-1/2” narrow center side rails (Item 6) into the
slots and slide down.
5
Final Side Rail Assembly
Install the remaining 31” x 5-1/2” side rails (Item 3) (one w/ logo) and
slide down.
Install the remaining 14-1/2” x 5-1/2” side rails (Item 5) into the slots and
slide down.
5
5
6
4
6
5
5
3
Logo
8
8
7
7
Post Cap Assembly
Remove the rubber cap from the corner posts studs.
Align the hole of the 4” x 4” post cap (Item 9) with stud and tighten until
the cap makes contact with the post.
NOTE: Do not overtighten.
Repeat procedure on all posts.
Rubber Cap
Stud
9