Installation and Operating Instructions CALIMA 200 Series Wireless Chime Kit Kit consisting of a wireless chime with LED ring and wireless bell button
Guarantee / Package contents / Materials required Dear Customer, With this device you have acquired a quality product which we have developed and produced for you with the greatest possible care and to the highest standards. The statutory guarantee period applies. Defects caused by improper handling, misuse or disregard of the installation and operating instructions are excluded from this guarantee.
Safety instructions / Cleaning Do not expose the wireless chime to dripping or splashing liquid! Do not place any vessels filled with liquid on it! Do not cover it with objects or blankets, curtains, etc. and protect it from direct sunlight and naked flames! Do not expose the batteries in the wireless bell button to excessive heat (e.g. sunlight, fire or similar)! Intended use The devices described here are solely intended as a radio-controlled bell and signalling system for private use.
Table of Contents Initial information: • Guarantee . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 • Package contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Table of Contents Coupling • Coupling the wireless chime and wireless bell button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 • Optional: Extending by adding further wireless bell buttons / wireless chimes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
xCALIMA 200 – the highlights explained briefly The wireless chime kit is made up of a wireless chime and a wireless bell button. The wireless chime can be installed in any place in the house or, for example, on the patio – wherever it is needed. It fits harmoniously into your furnishings and is nonetheless an eye-catcher. A large number of varied melodies are clearly distinguished from ambient noises; in addition, the flashing coloured LED ring assists perception in an ideal way.
CALIMA 200 wireless chime kit product overview Loudspeaker Radio chime Battery compartment cover LED ring Menu button Select button Battery compartment Battery holder Wireless bell button Screws LED Button Nameplate 7
First-time use / starting up – wireless chime Before using for the first time, you only have to insert the batteries into the wireless chime and wireless bell button and mount the wireless bell button. Simply install the wireless chime in the required place. 1 The batteries required are not included. Wireless chime: 4 x 1.5 V (AA type) batteries Wireless bell button: 2 x 1.5 V (AAA type) batteries Open the battery compartment by using a coin to unscrew the cover anti-clockwise.
First-time use / starting up – wireless chime 2 Remove the battery holder from the chime. Please note: 3 Insert 4 x 1.5 V (AA type) batteries into the battery holder. Note the polarity. 5 • The contact springs on the battery holder must always be positioned where “+” and “–” are visible at the edge of the bottom of the housing. • The two small metal clips inside the housing must touch the contact springs of the battery holder. Otherwise the batteries do not have any contact.
First-time use / starting up – wireless bell button Wireless bell button: Mount, insert batteries, write on nameplate 1 Undo screws Use the Allen key to undo the screws in the cover of the wireless bell button, and then remove the top half. 3 Insert 2 x 1.5 V (AAA type) batteries into the bottom part of the wireless bell button. Note the polarity (see markings).
First-time use / starting up – wireless bell button Note: Where possible, do not mount the wireless bell button on metal parts, as this reduces the range significantly. 2 Mounting holes Use the screws supplied to fix the bottom part of the wireless bell button through the mounting holes and onto the wall. 4 To label, pull the nameplate out at the side and then push it back in again. Use the hexagon socket screws to screw the top part of the wireless bell button firmly onto the bottom part.
Individual settings – melody The wireless chime is set and operated by 2 buttons: 1 • Selection button (left) • Menu button (right) 1x The voice output of the wireless chime signals the respective status of the settings. Press the wireless bell button, that corresponds to the melody that you want to set. 4 MELODY SELECTION You will hear “Melody selection”. 12 5 Press the Select button until the required melody is played.
Individual settings – melody 3 1x 2 FLASHES BLUE Then, press the Menu button on the wireless chime in its normal state once. 6 SETTING FINISHED The LED ring flashes blue as confirmation. From now on, you hear the last played melody when the wireless bell button is pressed. Note: The wireless chime automatically returns to the normal state, if no button has been pressed for 7 seconds. You will hear "Setting finished” as confirmation.
Individual settings – colour of the LED ring Press the wireless bell button to set the colour of the LED ring on the wireless chime. 5 SETTING FINISHED 2x 2 1x 1 Then, press the Menu button in the normal state twice. 7 seconds after the last button was pressed you will hear “Setting finished”. From now on, the LED ring lights up in the set colour when the wireless bell button is pressed. The wireless chime automatically returns to the normal state if no button has been pressed for 7 seconds.
Individual settings – colour of the LED ring 3 COLOUR SELECTION You will hear “Colour selection”. The LED ring lights up with the currently set colour. 4 Now, press the Select button until the LED ring lights up in the required colour. Your selection is saved automatically if no button is pressed for 7 seconds. Good to know: You can set the colour with which the LED ring lights up when a specific wireless bell button is pressed.
Individual settings – volume 2 3x 1 FLASHES GREEN Press the Menu button 3 times in the normal state. 5 SETTING FINISHED The LED ring flashes green as confirmation. 7 seconds after the last button was pressed you will hear “Setting finished”. From now on, the wireless chime signals with the last selected volume. The wireless chime automatically returns to the normal state, if no button has been pressed for 7 seconds.
Individual settings – volume 3 VOLUME You will hear “Volume”. 4 Press the Select button until the melody is played with the required volume. Your selection is saved automatically if no button is pressed for 7 seconds. Note: The volume of the wireless chime can always only be set the same for all wireless bell buttons used.
Mute / slumber function To do this, two options are available for you to choose from: • The function can either be activated for a previously defined period (slumber function) • or for an unlimited time (mute). Both functions, i.e. mute and slumber mode, are indicated visually. The LED ring flashes green until the wireless chime is back in active mode, and therefore serves as a reminder to end muting.
Switching mute on / off (for an undefined period) 3 1x 2 FLASHES GREEN LIGHTS UP GREEN If mute is active, the LED ring flashes green at regular intervals. Press the Select button to end mute. As confirmation, the LED ring lights up green while you press the button.
Start / prematurely end slumber function for 1, 3, 9 hours 1 2 – 4x 2 FLASHES 2 – 4 X YELLOW Press the Select button 2, 3 or 4 times at one second intervals in the normal state to activate the slumber function for 1, 3 or 9 hours. As confirmation, the LED ring then flashes yellow 2 to 4 times, depending on how often you pressed the Select button (see table). • You can use the slumber function to mute the wireless chime for a period limited from the start, i.e.
Start / prematurely end slumber function for 1, 3, 9 hours 4 3 FLASHES YELLOW LIGHTS UP YELLOW While the slumber function is active, the LED ring flashes yellow at regular intervals. Press the Select button to end the slumber function prematurely. As confirmation, the LED ring lights up yellow while you press the button.
Coupling the wireless chime and wireless bell button 2 Press the Menu button in the normal state 4 times. 5 COUPLING FLASHES RED 4x 1 The LED ring flashes red as confirmation. You will hear “Coupling”. 6 1. SET MELODY 2. SETTING FINISHED Press the wireless bell button within 30 seconds. 22 You will hear the set melody and “Setting finished”. The wireless bell button is now coupled with the chime.
Coupling the wireless chime and wireless bell button 3 4 COUPLING ACTIVE LIGHTS UP RED Press the Select button within 7 seconds. As confirmation, the LED ring lights up red and you will hear “Coupling active". At the end of the process the wireless chime returns to the normal state. Repeat the process to couple additional wireless bell buttons.
Deleting the coupling between the wireless chime and bell buttons 12 4x 10 sec. 1 LED RING GOES OUT Press the Menu button in normal state 4 times. 3 1. COUPLING DELETED 2. SETTING FINISHED Press the Select button within 7 seconds and keep it pressed for 10 seconds. The LED ring goes out as confirmation. 5 After the coupling has been deleted, the wireless chime no longer responds if a wireless bell button is pressed. You hear “Coupling deleted” and then “Setting finished”.
Optional: Using the alarm function The alarm function can be used in combination with the wireless bell button named below (not included in the kit) as a quickly ready, flexible and above all mobile in-house help call system. In this case, the wireless chime acts as an alarm generator and the optional wireless bell button acts as a signal generator. In this way, for example, a person in need of help can easily draw attention to themselves.
Warning if batteries are low Wireless chime: As soon as the batteries have to be replaced, the wireless chime issues a warning in the form of beep tones. Replace the batteries as described on p. 8/9. Note: Your individual settings (melody, colour of the LED ring, volume) are retained when you change the batteries or if the batteries are dead! If the batteries in the wireless chime are low, this is indicated by 2 beep tones after the melody.
Radio range x The wireless chime kit has a maximum range of 250 m in the free field, provided that the wireless bell button is not mounted on metal. Note: Walls, doors, metal parts, etc. can reduce the range significantly. Overview: Reduction of range by different materials 100 %: Free field approx. 80 %: Wood, glass approx. 60–70 %: Gypsum board/metal stud wall approx. 50–70 %: Stone approx. 30–50 %: Concrete wall approx.
x Possible combinations / networking The figures show some of the possible combinations. Among other things, each wireless chime can be activated individually or centrally. Mel. 1 Mel. 2 Mel. 1 Mel. 2 Mel. 1 Mel. 3 Mel. 2 28 Mel. 3 Individual call Up to 11 wireless bell buttons can activate 1 wireless chime: Several wireless bell buttons at different doors/gates are coupled with one wireless chime in one room. Mel. 3 Mel.
Technical datax Radio chime Colour White Wall mounted No Radio frequency 868.35 MHz Call differentiation 11 Volume Max. 83 dB(A), depending on the melody Dimensions Ø 60 mm x 102 mm Power supply 4 x 1.5 V batteries (AA type) Temperature range 5 to 40 °C Use in dry rooms only Wireless bell button Colour White Wall mounted Yes Radio frequency 868.35 MHz Maximum transmission power < 25 mW Range 250 m Dimensions 36 x 100 x 17 mm Power supply 2 x 1.
xError – Causes – Help 1. The LED of the wireless bell button flashes after the button is pressed, but the wireless chime does not respond. 1.1. No batteries are inserted into the wireless chime. Insert 4 x 1.5 V (AA type) batteries (see p. 8/9). 1.2. One or several batteries in the wireless chime have no contact with the positive terminal in the battery holder. Push the batteries upwards by hand until the positive terminal of the battery has contact with the positive terminal of the battery holder.
Error – Causes – Help x 2. After the melody, you hear two bleep tones. 2.1. The batteries in the wireless chime do not have the required voltage. Standard rechargeable batteries often do not have the required voltage; only 1.2 V. Only use batteries or rechargeable batteries with 1.5 V voltage. 2.2. The battery power is low. Insert 4 new 1.5 V (AA type) batteries. 3. After the melody you hear four beep tones (optional if using the MISTRAL SE 03.1 wireless bell button). 3.1.
x Declarations of conformity / Disposal and recycling Declarations of conformity We hereby declare that this product is in compliance with the essential requirements and the other relevant provisions of Directive 2014/53/EU. Depending on the device type, tested to the respective relevant standards EN 3000220-2, EN 301489-1, EN 62368-1:2016, EN 55022, EN 50581 o RED Directive 2014/53/EU o EMC Directive 2014/30/EU o RoHS Directive 2011/65/EU o WEEE Directive 2012/19/EU EC Declaration of Conformity: visit www.
Guarantee and liability x Guarantee and liability GROTHE GmbH chimes are produced using modern technology and are subjected to one hundred percent quality control. If a defect nonetheless occurs in your device, GROTHE GmbH provides a guarantee with the following scope. 1.) Our guarantee includes subsequent improvement or replacement delivery of a device, if it verifiably has functional or material defects. 2.) The guarantee does not cover natural wear and tear or transport damage.
Quick-start guide 2 3 1x 1x Melody selection 1 1 2 3 12 3x Volume 1 3 FLASHES GREEN 34 12 4x Coupling 1 COLOUR SELECTION 2x 1x Colour selection LED ring FLASHES BLUE COUPLING FLASHES RED 3 VOLUME
Quick-start guide MELODY SELECTION 5 4 5 4 5 12 4 COUPLING ACTIVE LIGHTS UP RED 6 SETTING FINISHED SETTING FINISHED Mute / Slumber function Mute for 1 hour: Press Select button 2 times, LED ring flashes yellow 2 times Mute for 3 hours: Press Select button 3 times, LED ring flashes yellow 3 times Mute for 9 hours: Press Select button 4 times, LED ring flashes yellow 4 times 6 5 SETTING FINISHED 1. SET MELODY 2.
GROTHE GmbH Löhestraße 22 D- 53773 Hennef V1 02/19 service@grothe.de www.grothe.