User manual
FIG.9
5 OPERATION AND FUNCTION
5.1 Time, Meter, Lux knobs
Knopf Funktion Einstellungen
Set the
sensitivity of
sensor
Ambient
light
override
Range : Approx.. 5Lux) to „ “ (∞).
5 Lux : Sensor module can work at dark status
only
: Sensor module can work at any light
level
Range : Aprrox. 5 Sek. to 30 Min,
Test : Test mode (Load and red LED
will 2 sec. on, 2 sec aoff)
5sec - 30 min min. 5Min
Delay off
time
Range: Adjustable from „-“ (approx. Ø2m) to
„+“ (approx. Ø10m)
4.4 Wiring
Below are some examples of installation in different kinds of lighting fixtures
for reference. Ensure the sensor module is installed at least 60mm far away
from ballast, lamp holder, or bulb with filament. (See FIG.4)
4.4.1 Connect with lamp (See FIG.8)
Lamp
4.4.1 Connect with ballast (See FIG.9)
FIG.8
Ballast
6 GUARANTEE
GROTHE GmbH presence sensor is manufactured according to
the latest techniques and subjected to quality control.
If however, a defect should occur, GROTHE GmbH provides a
warranty to the following extent.
1. The warranty covers 24 months from date of purchase of the
device by the final end user. Compliance with the claim deadline
is to be demonstrated by voucher of purchase date by means of
an included invoice, delivery note, or similar document.
2. The guarantee includes the correction or resupply of a device
(according to our dicretion) if the function of the device is limited
or non existing due to proven material or manufacturing errors.
3. The warranty does not cover damage during the transport. Moreover,
damages on account of not following the instruction concerning
installation and unprofessional installation of the device.
GROTHE GmbH
Löhestrasse 22
D - 53773 Hennef
info@grothe.de
www.grothe.de