User's Manual

10
Single-slot charge cradle
1. Connect the charger to the charging slot (as below).
2. Put DT430 terminal and / or spare battery into the charger
cradle.
3. Plug the charger to the main electrical outlet.
4. The “Be be” sound rings and the LED light turns amber.
5. When charging is complete, the LED light turns green.
Cascade Charge Cradle
1. Connect 2 or 3 (max) charge cradles through charge cable as
showed. It may cause DT430 damage if over 3 charge cradles
are connected.
2. Put DT430 terminal and / or spare battery into the charger
cradle.
3. Plug the charger to the main electrical outlet.
4. The LED light turns amber.
LED light description
There are three LED lights on the front of DT430, the left one has
different status: