User's Manual

           
8
2. Removethebatterycover.
3.  Slidethebatterylocktotherightandholditattheunlockedposition.
4.  Liftthethebatteryfromthebatterycompartment.


BatteryCharging

ChargingtheDevice

1. ConnecttheAC/DCadaptortotheDCjackofthecradle.
2. Plug the AC/DC adaptor into a suitable power socket. The cradle power LED will turn
greenwhenpowerissuppliedtothecradle.  
3. Insertthedevicetothecradleslot.ThedeviceLEDwillflashamberwhilecharging,thenit
willturngreenwhenfullycharged.

C
hargingtheSpareBattery

1. Alignthebatterymetalcontactswiththecontactplatesofthebatteryslot.
2. Slidethebatteryto thebatteryslot. ThecradlebatteryLEDwillturnredwhilecharging,
thenitwillturngreenwhenfullycharged.

CascadingtheDT4000Cradles

DT4000 cradles can be cascaded in series to charge the DT4000 devices and batteries
simultaneouslywithoneAC/DCadaptor.Eachadaptorsupportsmaximum3cascadedcradles.

Important:Donotcascadeover3cradlesinseries.

1. DisconnectAC/DCadaptor,andturnover2cradles.
2. ConnecttheDCpowercableofonecradletotheDCpowerconnectoroftheothercradle.