Quick Reference Guide
Table Of Contents
- Contents
- Section 1: Introduction to Palm functions
- 1. PC system requirements
- 2. Understanding G18 interface and controls
- 3. Tapping versus clicking
- 4. Starting G18 and calibrating its screen
- 5. Adjusting screen brightness and contrast
- 6. To launch applications
- 7. Introduction to G18 interface
- 8. Setting up the G18 interface
- 9. Setting date, time and time zone
- 10.Setting Sleep Mode
- 11.Setting alert sound and volume
- 12.Setting system interface language
- 13.Setting up phone to phone IRDA data transfer
- 14.GPRS/communication setting
- 15.Using the onscreen keyboard
- 16.Installing add-on applications
- 17.Removing applications
- 18.HotSync Setting
- 19.IR HotSync operations
- 20.Flash BackupMan
- 21.Data transfer from other Palm terminals
- Section 2 : Communication and PDA Features
- Appendix I:Safety
- Appendix II: Install CD
- Appendix III: Specification
- Appendix IV: Care and maintenance
- Appendix V: Reset your G18
- Appendix VI: FCC Information
Section 1: Introduction to Palm functions
18.HotSync Setting
G18 Quick Reference Manual 23
To create a user profile:
1.Open Palm Desktop.
2.From the Tools menu, choose Users.
3.Click Profiles.
4.Click New.
5.Enter a unique name for the profile, and click OK.
To use a profile for the HotSync operation first time:
1.Connect your G18 HotSync cable to the computer serial port .
2.Click the HotSync Manager icon in the Windows system tray.
3.Click Profiles.
4.Select the profile that you want to load on the G18, and click OK.
5.Click “Yes” to transfer all the profile data to the G18.
The next time you perform a HotSync operation, Palm Desktop prompts
you to assign a user name to the G18.
Selecting HotSync setup options
You can choose when you want HotSync Manager to run. You can adjust
Hotsync options on the local machine and the modem at the same time.
1.Click the HotSync Manager icon in the Windows system tray.
2.Choose Setup.
3.Click the General tab, and select one of the following options: