Quick Reference Guide
Table Of Contents
- Contents
- Section 1: Introduction to Palm functions
- 1. PC system requirements
- 2. Understanding G18 interface and controls
- 3. Tapping versus clicking
- 4. Starting G18 and calibrating its screen
- 5. Adjusting screen brightness and contrast
- 6. To launch applications
- 7. Introduction to G18 interface
- 8. Setting up the G18 interface
- 9. Setting date, time and time zone
- 10.Setting Sleep Mode
- 11.Setting alert sound and volume
- 12.Setting system interface language
- 13.Setting up phone to phone IRDA data transfer
- 14.GPRS/communication setting
- 15.Using the onscreen keyboard
- 16.Installing add-on applications
- 17.Removing applications
- 18.HotSync Setting
- 19.IR HotSync operations
- 20.Flash BackupMan
- 21.Data transfer from other Palm terminals
- Section 2 : Communication and PDA Features
- Appendix I:Safety
- Appendix II: Install CD
- Appendix III: Specification
- Appendix IV: Care and maintenance
- Appendix V: Reset your G18
- Appendix VI: FCC Information
Section 2 : Communication and PDA Features
1. Using the Phone
G18 Quick Reference Manual 43
Enable/PIN Code
• Tap On from the pick list to enable the PIN Code.
• If the PIN Code has not been set, a dialog box will appear and ask
you to set the PIN Code.
Disable PIN Code
• Tap Off from the pick list to disable the PIN Code.
• If there is an enabled PIN Code, a dialog box will appear and ask
you to input the PIN Code.
• If your input is right, the PIN Code will be disabled.
Voice Call Barring
• Four types of setting are available for Outgoing item.
• Three types of setting are available for incoming item.
Input the PIN
Code
• Deactivated for "disable call
barring function".
• All for "All calls".
• Int'l for "International call".
• Int'l for x Home for "International
calls except home call".