User Instructions

19
Mounting the saber
1. Remove the guard from the hilt.
2. Fit the blade into the handle: The blade is inserted through the top of
the handle, by unscrewing the guard anti-clockwise.
Ensure the handle and the blade’s protective plugs have been removed.
3. The 2 batteries are already inserted into the saber’s hilt. To remove
the batteries, unscrew the pommel anti-clockwise. The batteries are
inserted through the bottom of the handle, the plus side fi rst. Screw the
pommel back into its place once the batteries are installed.
CAUTION: Be sure to align the pommel with the axis of the handle before
tightening , as shown on the fi gure above. If you can feel resistance when
tightening, this means the alignment is not good. Do not force tight as
you risk damaging the thread of the handle, the pommel or the guard of
your SOLAARI lightsaber.
1
1
2
2
3
3 1 2