User Instructions

23
LED related warnings
It is mandatory to turn the saber off then remove the batteries before
removing the blade in order to avoid unintentionally powering up the
LED. Do not point the LED light beam towards anyone’s eyes or your own
face. Do not touch the LED so as to avoid burns. The prolonged use of
the product can generate heat at the LED, which can be felt through the
handle: this is normal and expected.
SOLAARI cannot be held responsible in the event of problems caused by
failure to comply with one of the previous warnings.
Battery warnings
Do not short-circuit or pierce the batteries. Do not use new batteries
with batteries which have already been used. Always remove the saber’s
batteries in the event of an extended period without use. Avoid completely
discharging the batteries. Do not leave the batteries charging for more
24h running. The batteries must not be immersed in liquid, whether they
are placed in the saber or not. Do not throw away the batteries, do not put
it in the fi re. Recycle used batteries in accordance with local regulations.
If you want to purchase new batteries, please use rechargeable
Lithium-Ion 18650 batteries with a voltage rating between 3.6V and
3.7V (recommended minimum capacity of 3Ah and a minimum 3A rated
current), equipped with a button on the positive (“+”) current output as
shown on the image below, and equipped with a PCM (Protection Circuit
Module).
The batterie are guaranteed for 1 year.
WARNING, THERE IS A RISK OF EXPLOSION IF A NON-COMPATIBLE
BATTERY IS USED. THROW AWAY USED BATTERIES FOLLOWING LOCAL
REGULATIONS.