Installation Instructions

1.
2.
3.
4.
Installation:
Place the device above your water
reservoir. Make sure the sensors
are able to reach inside the water
(cord lengths are 3 meters each).
Drill and place 2 screws to hang
the device using the screw
hangers (10)
(Distance between holes is 65mm)
Attach the pH (4, 12) and EC (3,
11) + Water temp. (2, 11) sensors
and put them in the water.
Connect the device to a power
supply (1, 13). The light indicator
(6) will blink in green.
1.
2.
3.
4.
5.
6.
7.
On your mobile device, go to WiFi
networks and connect to the
device’s network (Growee_####)
Press on the pop-up message
“Tap to connect to Growee_####”
On the new opened window, press
“Login”
Choose the desired WiFi network
from the list. If the network doesn’t
show, press “Scan”
Enter the network’s password
Enter the device’s registration
code
Press “Finish”. Your device is now
connected to a WiFi network. The
light indicator will show full green
and stop blinking.
Changing the WiFi network:
The device connects automatically
to the last WiFi network it was
connected to. To change the
network, press and hold the reset
button (7) until the light indicator
starts to blink again. You can now
re-connect the device to another
network.
If your WiFi network isn’t stable you
can connect your Growee device
to the internet using an ethernet
cable.
1.
*
2.
3.
4.
Using the app
Download the Growee app from
Google Play (android) or the Apple
App Store (ios) or go to:
www.mygrowee.com
Create an account by signing up
Press “Add new device” and enter
your device’s registration code
Complete the set-up process to
define your grow-settings.
You will only be able to access the
app features after the set-up
process has completed. you can
edit your grow settings at any time.
65mm
Connect the Hydro M ast er to
a WiFi network: