User's Manual
11
5.3 Starting the growing process
You can use aspara
™
Nature through either the built-in control
panel (ofine mode) or the aspara
™
App (online mode). Choose
either one way to start planting.
You cannot change the mode (from online to ofine or vice versa)
after you have started planting. To switch between online and
ofine mode, see Section 5.5.2 Ending the growing process.
* Note: 5.3.1 and 5.3.2 sequence and images may not be the
most updated. Please browse www.aspara.hk for the most
updated setup instruction.
5.3.1 Online mode - Control by using aspara™ App
Setup:
• To use the app, rst download the app. See Section 8 for download.
• Open the app and sign in. You can sign in with email or social
media accounts.
• You should reach the My Veg page after sign in. Click “Add
Device” or “+” and then “Set up a new device”. Set up according
to the setup guide in the app, then you should be able to nd your
aspara in the app.
• Go to www.aspara.hk/video for detailed video instruction on
online mode setup.
Setting:
• After your aspara
™
Nature is available in your app, you can start
growing. Select your appliance shown in the My Veg page of
your app and select the type of seeds you have added to aspara
™
.
• You can then see your plant status in the app. In the plant status
page, click the top right corner for the control panel. You can
set the sunrise time (i.e. LED grow light turn on time) of
aspara
™
. (Note: there is no need to set the present time, the
clock of aspara
™
will be corrected to local time automatically).
See Section 5.4.4 on more about sunrise.
• You can also control the growing mode between auto and
manual in the control panel. You can change the planting stage
(e.g. from germination to growth stage) or set the growing
speed (only in growth stage) if you have selected the manual mode.