User's Manual

5.1.2 Setting up the tank assembly and add water
• Insert and attach the sensing probe to the inside of the tank
according to the gure below.
• Fill the tank to the ‘max’ mark shown on the sensing probe with
either distilled water or tap water (only if you know tap water
in your area is not hard water). The water should be at room
temperature. Do not use well water or softened water as this
may interfere with plant development. NEVER add water
to the grow tray. Water should only ever be added to the tank
as aspara
TM
Nature will run water from the tank to the grow tray
automatically to water your plants at appropriate times.
Max marking
5. HOW TO USE aspara
™
Nature
Before rst use, wash all parts of the grow tray and the tank
assembly. Additionally, wash the grow hole covers and the
germination domes
5.1 Powering up and getting the appliance ready to grow
5.1.1 Power up
Assemble the power adaptor and power cord. Plug one end
into an electricity socket in your home and the other into the
appliance. The appliance will turn on and you will see the control
panel showing “aspara”.