2 in 1 Steam Mop & Steam Cleaner CONTENTS: 2 Safety Instructions 4 Know Your Product 5 Assembly 7 Features And Getting Ready 9 Accessory Attachments 12 Cleaning Bare Floors 12 Storing The Cleaner 13 Troubleshooting 14 Customer Service 14 Warranty Page 1 of 14
in 1 User Manual IMPORTANT SAFETY INSTRUCTIONS Read all instructions before using your Steam Cleaner. When using an electrical appliance, basic precautions should be observed, including the following: WARNING – To reduce the risk of fire, electric shock, of injury: Do not direct steam at people, animals, at electrical outlets and equipment containing electrical components such as the interior of ovens. Do not expose to rain. Store indoors.
THIS MODEL IS FOR HOUSEHOLD USE ONLY Commercial use of this unit voids the manufacturer’s warranty. Never transport or move the device by pulling the cord or carrying it by the cord. Do not use any solvents or abrasive cleaning agents when cleaning the device. They could damage the unit’s surface. When needed, wipe the device with a slightly damp cloth. Test the device for the first time at a discrete place.
KNOW YOUR PRODUCT 1. Strain Handle 2. Trigger 3. Cord Hooks 4. Handle Tube 5. Carrying Handle 6. Handy Steamer Release 7. Unit Body 8. Shoulder Strap 9. Water Tank 10. Water Tank Release 11. Handy Steamer Trigger 12. Handy Steamer Cord Release 13. Handy Steamer Body 14. Tool Caddy 15. Clip Holds Main Body To Head 16. Mop Pad 17. Mop Pad Release 18. Swivel Head 19. Power Cord 20. Window Cleaning Kit 21. Extension Hose 22. Round Brushes (2 nylon and 1 copper) 23. Angle Nozzle 24. Scoop Nozzle 25. Adaptor 26.
HOW TO ASSEMBLE YOUR STEAM CLEANER NO SPECIAL TOOLS NEEDED The holes in the back of the Unit Body and Swivel Head are shaded white in these pictures for identification. 1. Remove the Unit Body Clip (Part 15) from the back of the Unit Body (Part 7). 2. Slide the bottom of the Unit Body onto the neck of the Swivel Head (Part 18). 3. Make sure the hole in the back of the Swivel Head’s neck is showing through the hole in the back of the Unit Body. 4.
5. Insert the Handle Tube (Part 4) into the Unit Body (Part 7) as indicated above until it clicks in.
STEAM CLEANER PRODUCT FEATURES Water Tank: (Part 9) The Water Tank is located on top of the Handy Steamer (Part 13). Distilled or demineralized water can be used instead of tap water. WARNING: Do not use chemicals with your Steam Cleaner Do not attempt to use your Steam Cleaner without water in the tank Water Filter is located behind the water tank (Part 9). This removes minerals and other impurities from tap water. It prevents water deposits from damaging your Steam Cleaner.
Filling the Water Tank A. Use the included Fill Cup as indicated above, Pic. A B. You may also remove the water tank to fill it in the sink by pressing the Water Tank Release (Part 10) as shown above, Pic. B WARNING: Your Steam Cleaner will sound in abnormal way if there is no water inside the Water Tank. In this case please switch off your Steam Cleaner, unplug it and refill the Water Tank. Steam Cleaner may be damaged if used for a long period without any water in the tank.
ACCESSORY ATTACHMENTS Your Steam Cleaner can be used with the following accessories: Removing the Handy Steamer 1. Pull up the clear Handy Steamer Lock (A) and undo the Handy Steamer Release (B, Part 6) as indicated in picture 1 above. 2. Lift the Handy Steam up and out.
Attaching the Extension Hose 1. Pull out the Adaptor (Part 25) from the hole in the bottom of the Handy Steamer (Part 13). 2. Swing the adaptor to the side to make room for the Extension Hose. 3. Align the locking tabs on the Extension Hose (Part 21) to the slots on the Handy Steamer Body (Part 13) and insert the Extension Hose. 4. Twist the Extension Hose clockwise to lock it securely in place.
USING THE ACCESSORIES Extension Hose (Part21): Perfect for hard-to-reach areas Jet Nozzle (Part 26): Handy for use on floors and edges Angle nozzle (Part 23): Ideal for hard-to-reach areas such as windowsills and toilet bowls Round Brushes (Part 22): Recommended for sealed grout, cook tops and bench tops Fabric Tool (Part of Window Cleaning Kit, Part 20): Great for steaming out wrinkles and deodorizing fabrics.
CLEANING BARE FLOORS Your Steam Cleaner is designed to clean bare floors such as ceramic tile, vinyl, laminate, marble, stone and sealed hard wood floors. Use of your Steam Cleaner on waxed or some unwaxed floors may result in a diminished glossiness. The Steam Cleaner should not be used on unsealed wood floors. For best results test in an inconspicuous area or check the care instructions from the flooring manufacturer.
Wrap Power Cord (Part 19) around Cord Hooks (Part 3) on side of Steam Cleaner. Wipe all surfaces of Steam Cleaner with a soft cloth. Store upright in a protected, dry area. CAUTION: Upright storage of the Steam Cleaner with a wet Mop Pad may result in the formation of white marks on your floor. To remove the white marks, clean the affected area with vinegar.
CUSTOMER SERVICE If you experience any problem with your appliance and you require advice please contact the technical helpline: 1-800-727-7129 Technical Specification Voltage: 120V Power: 1500 Watts www.gruenesteam.com When contacting Gruene, please have your model number available Please record your model number _____________________________ Please record your purchase date _____________________________ Note: Please keep your original sales report.