Product Manual

ManualsBrandsGrundfos Pumps ManualsElectricGrundfos 5SQE05-90 - 5 GPM 1/2 HP SQE-Series Deep Well Submersible Pump (90' Rated Head) (2W - 200-240V)

Table Of Contents

1. SQ, SQE introduction
- SQ, SQE features and benefits
- SQ, SQE identification
  - Type key example SQ, SQE
2. SQ, SQE applications
- SQ with pressure switch and pressure tank
- Constant-pressure control with CU 301, residential water supply
- Constant-pressure control with CU 301, irrigation
- Maintaining a constant water table
- Emptying or filling a tank
- Pumping from one tank to another
- Setting of operating parameters
- SQE with manual speed control
3. Performance range
4. SQ, SQE installation
5. Sizing and selection
- System sizing guide
6. Cable sizing
- Cable sizing chart
7. SQ, SQE curve charts
- 5 SQ, SQE
- 10 SQ, SQE
- 15 SQ, SQE
- 22 SQ, SQE
- 30 SQ, SQE
8. SQ, SQE technical data
- Electrical data
  - Control units CU 300 and CU 301
- Operating conditions
  - Storage conditions
- Motor data
- Dimensions and weights
  - SQ, SQE
9. SQ, SQE construction
- Materials of construction
- SQ, SQE material specification
- Control units for SQ, SQE
- CU 301
- CU 300
10. CU331SP variable frequency drive
- Features
  - User interface
  - Functions
- Applications
- System components
- Identification
  - Nameplate
- CU331SP product range
- CU331SP performance range
- CU331SP sizing
- CU331SP operation
- CU331SP installation
  - Mechanical installation
- CU331SP electrical connection
- CU331SP technical data
- CU331SP curve charts
11. Accessories
- CU 301 Constant Pressure System
- CU 300 Status Box & R100
- SQ, SQE flow sleeves
12. SP introduction
- Introduction
- Applications
  - Pumped liquids
- Features and benefits
- Identification
13. SP product overview
- SP performance range 60 Hz
- Pump range
- Motor range
- Motor protection and controllers
14. SP construction
- Sectional drawing, SP pump 4" spline shaft
  - Material specification
- Sectional drawing, SP pump 4" smooth shaft
- Sectional drawing, SP pump 6" (SP 85S - 300S)
  - Material specification
- Sectional drawing, SP pump 8" (SP 385S - 475S)
  - Material specification
- Sectional drawing, SP pump 10" (SP 625S - 1100S)
  - Material specification
- Sectional drawing, MS motors
  - Material specification, MS 402, MS 4000, and MS 6000C motors
  - R-version motor
- Sectional drawing, MMS motors
15. SP operating conditions
- Operating conditions
  - Maximum liquid temperature
  - Operating pressure
- Curve conditions
  - General
16. How to read the curve charts
17. SP curve charts and technical data
- 4" and larger wells
- SP 5S (5 gpm)
- SP 7S (7 gpm)
- SP 10S (10 gpm)
- SP 16S (16 gpm)
- SP 25S (25 gpm)
- SP 35S (35 gpm)
- SP 45S (45 gpm)
- SP 62S (62 gpm)
- SP 77S (77 gpm)
- 6" and larger wells
- SP 85S (85 gpm)
- SP 150S (150 gpm)
- SP 230S (230 gpm)
- SP 300S (300 gpm)
- 8" and larger wells
- SP 385S (385 gpm)
- SP 475S (475 gpm)
- 10" and larger wells
- SP 625S (625 gpm)
- SP 800S (800 gpm)
- SP 1100S (1100 gpm)
18. SP electrical data
19. Accessories
- MP 204
  - Applications
  - Benefits
- Control functions
- CU331SP constant pressure drive kits
  - Grundfos GO remote app and Grundfos GO CAPS
- Connecting pieces
  - Thread-to- thread
- Zinc anodes
- SA-SPM 6 control boxes
- Pt100
20. Energy consumption
- Energy consumption of submersible pumps
21. Cables
- Cable sizing charts
22. Friction loss tables
23. Grundfos Product Center

SP curve charts and technical data

SQ, SQE, CU 331, and SP

4" and larger wells - continued

SP 25S (25 gpm) / 4, 6 inch motors

Notes:

Control box is required for 3-wire, single-phase applications. Data does not include control box.

DS designation = Built into sleeve, 1 - 1/2" NPT, 6" minimum well diameter.

Performance conforms to ISO 9906. 1999 (E) Annex A. Minimum submergence is 2 feet.

Pump model

Nom.

head

[ft]

Volts

[V]

Motor

[Hp]

Dimensions

Net weight

(complete)

[lb]

25S

ABCDE

TM00 8521 3196

[in. (mm)] [in. (mm)] [in. (mm)] [in. (mm)] [in. (mm)]

25S, motor dia. 4 inch, 2 wire motor, 60 Hz - rated flow 25 gpm (1.5" NPT)

25S05-3 60 1

115 .5 ■ 19.61 (498) 11.03 (280) 8.59 (218) 3.74 (95) 3.98 (101) 21.6

230 .5 ■ 19.61 (498) 11.03 (280) 8.59 (218) 3.74 (95) 3.98 (101) 21.6

25S07-5 99 1 230 .75 ■ 21.86 (555) 11.62 (295) 10.24 (260) 3.74 (95) 3.98 (101) 23.4

25S10-7 139 1 230 1 ■ 24.10 (612) 12.21 (310) 11.89 (302) 3.74 (95) 3.98 (101) 25.2

25S15-9 179 1 230 1.5 ■ 27.25 (692) 13.71 (348) 13.55 (344) 3.74 (95) 3.98 (101) 28.8

25S, motor dia. 4 inch, 3 wire motor, 60 Hz - rated flow 25 gpm (1.5" NPT)

25S05-3 60 1

115 .5 ■ 19.61 (498) 11.03 (280) 8.59 (218) 3.74 (95) 3.98 (101) 21.6

230 .5 ■ 19.61 (498) 11.03 (280) 8.59 (218) 3.74 (95) 3.98 (101) 21.6

25S07-5 99 1 230 .75 ■ 21.86 (555) 11.62 (295) 10.24 (260) 3.74 (95) 3.98 (101) 23.4

25S10-7 139 1 230 1 ■ 24.10 (612) 12.21 (310) 11.89 (302) 3.74 (95) 3.98 (101) 25.2

25S15-9 179

1 230 1.5 ■ 27.25 (692) 13.71 (348) 13.55 (344) 3.74 (95) 3.98 (101) 29.7

230 1.5 ■ 25.75 (654) 12.21 (310) 13.55 (344) 3.74 (95) 3.98 (101) 27.0

460 1.5 ■ 25.75 (654) 12.21 (310) 13.55 (344) 3.74 (95) 3.98 (101) 28.8

25S20-11 219

12302● 34.69 (881) 19.49 (495) 15.20 (386) 3.74 (95) 3.98 (101) 33.1

230 2 ■ 28.90 (734) 13.71 (348) 15.20 (386) 3.74 (95) 3.98 (101) 37.0

460 2 ■ 28.90 (734) 13.71 (348) 15.20 (386) 3.74 (95) 3.98 (101) 33.3

25S30-15 298

12303● 41.11 (1044) 22.60 (574) 18.51 (470) 3.74 (95) 3.98 (101) 61.2

E = Maximum diameter of

pump including cable

guard and motor.

230 3 ● 36.50 (927) 18.00 (457) 18.51 (470) 3.74 (95) 3.98 (101) 53.1

460 3 ● 36.50 (927) 18.00 (457) 18.51 (470) 3.74 (95) 3.98 (101) 53.1

25S50-26 517

12305● 54.22 (1377) 26.62 (676) 27.60 (701) 3.74 (95) 3.98 (101) 72.9

230 5 ● 50.32 (1278) 22.72 (577) 27.60 (701) 3.74 (95) 3.98 (101) 72.9

460 5 ● 50.32 (1278) 22.72 (577) 27.60 (701) 3.74 (95) 3.98 (101) 72.9

SP 25S, motor dia. 6 inch, 60 Hz - rated flow 25 gpm (1.5" NPT)

25S75-39DS 775 3

230 7.5 ▲ 66.06 (1678) 23.50 (597) 42.56 (1081) 5.63 (143) 5.43 (138) 122.1

460 7.5 ▲ 66.06 (1678) 23.50 (597) 42.56 (1081) 5.63 (143) 5.43 (138) 122.1

25S100-52DS 1034 3 460 10 ▲ 90.17 (2290) 24.69 (627) 65.48 (1663) 5.63 (143) 5.51 (140) 163.1

■ MS 402 motor.

● MS 4000 motor.

▲ MS 6000C motor.

B C

Rp 1

NPT