Product Manual
Table Of Contents
- English (US)
- 1. Limited warranty
- 2. General information
- 3. Receiving the product
- 4. Installing the product
- 5. Startup of the product
- 6. Product introduction
- 7. Service
- 8. Taking the product out of operation
- 9. Troubleshooting
- 9.1 The motor does not start and makes no noise
- 9.2 The motor does not start but makes noise
- 9.3 The motor turns with difficulty
- 9.4 The motor does not stop when the demand for water has ceased
- 9.5 The pump does not deliver water
- 9.6 The pump does not prime
- 9.7 The pump supplies insufficient flow
- 9.8 The pump vibrates and operates noisily
- 9.9 The pump stops unexpectedly during operation and starts again after a while
- 9.10 The pressure switch starts and stops frequently during normal water delivery
- 10. Technical data
- 11. Disposing of the product
4.3.3 Setting the voltage converter
WARNING
Electric shock
Death or serious personal injury
‐ Do not pull the voltage switching plug by the wires. To
avoid damage, only use a firm hand grip around the
voltage switching plug.
1. Check the voltage indicated on the side of the voltage
converter.
2. Turn the indicator so that the desired voltage (115 V or 230 V)
points towards the side with the "M" lock catch.
3. The arrow on the converter next to the required voltage must
be aligned with the "F" arrow on the housing.
4. Push the converter into position until the reference catch "M"
clips in place.
230V 115V
Related information
4.3.2 Connecting to the power supply
5. Startup of the product
14
English (US)