Product Manual
Table Of Contents
- English (US)
- 1. Limited warranty
- 2. General information
- 3. Receiving the product
- 4. Installing the product
- 5. Startup of the product
- 6. Product introduction
- 7. Service
- 8. Taking the product out of operation
- 9. Troubleshooting
- 9.1 The motor does not start and makes no noise
- 9.2 The motor does not start but makes noise
- 9.3 The motor turns with difficulty
- 9.4 The motor does not stop when the demand for water has ceased
- 9.5 The pump does not deliver water
- 9.6 The pump does not prime
- 9.7 The pump supplies insufficient flow
- 9.8 The pump vibrates and operates noisily
- 9.9 The pump stops unexpectedly during operation and starts again after a while
- 9.10 The pressure switch starts and stops frequently during normal water delivery
- 10. Technical data
- 11. Disposing of the product
4.2.3 Installation examples
We recommend that you follow the installation examples.
Valves are not supplied with the pump.
4.2.3.1 Suction from a tank
1
2
3
3
6
5
7
4
TM073986
Pos. Description
1 Highest faucet
2 Isolating valve
3 Pipe support
4 Pressure tank
5 Drain to sewer
6
Strainer. A foot valve is optional. We recommend using a
foot valve together with JP PS.
7 Slight downward slope
4.2.3.2 Suction from a well (outdoor installation)
6
1
7
2
3
3
5
4
TM073984
Pos. Description
1 Highest faucet
2 Isolating valve
3 Pipe support
4 Pressure tank
5 Slight downward slope
6
Foot valve with strainer. The foot valve is optional. We
recommend using a foot valve with a JP PS installation.
7 Pump and tank cover
8
English (US)