Product Guide

Accessories
SQFlex
7
37
IO 50 SQFlex switch box
The IO 50 is designed specifically for solar-powered
SQFlex systems.
The IO 50 enables manual starting and stopping of the
pump in an SQFlex Solar system and functions as a
connection box joining all necessary cables.
Fig. 27 IO 50, dimensional sketch
Fig. 28 Wiring diagram
IO 101 SQFlex switch box
The IO 101 is designed specifically for solar-powered
SQFlex systems.
The IO 101 enables the connection of a back-up
generator in case of insufficient solar energy. The
switching between solar power and generator must be
made manually.
In case the generator is stopped manually or runs out
of fuel, the IO 101 will automatically change over to the
solar panels.
The IO 101 functions as a connection box joining all
necessary cables.
Fig. 29 IO 101, dimensional sketch
Fig. 30 Electrical connections
IO 102 SQFlex breaker box
The IO 102 is designed specifically for wind-powered
SQFlex systems.
The IO 102 enables manual starting and stopping of
the pump in an SQFlex Wind system or an SQFlex
Combo system.
The on/off switch has a built-in "electrical brake" for the
turbine. When the switch is in "off" position, the turbine
stops or slows down.
The IO 102 rectifies the three-phase AC voltage from
the wind turbine into DC voltage.
Product Product number
IO 50 SQFlex 96959028
TM02 4058 4701
Product Product number
IO 101 115 VAC SQFlex 96481502
IO 101 230 VAC SQFlex 96475074
4” (100 mm)
6” (152 mm)
3 1/4” (80 mm)
4 9/16” (115 mm)
1 3/4” (44.6 mm)
TM02 2546 4003TM02 4162 5001
Product Product number
IO 102 SQFlex for wind turbine 96475065
199
263
113
8 in (199 mm)
10.5 in (263 mm)
4.5 in (113 mm)
PE
Generator Power Pump
Power
cord
included