SQFlex Service Instructions

35 / 60
4.5 Wind-powered system with CU 200 control unit and level switch
If the system does not work properly, follow the instructions in section 4.5.1 Trouble-shooting of a wind-
powered system with CU 200 control unit and level switch on page 36.
Pos. Component
1.
SQF pump
2.
Submersible drop cable
3.
Cable clips
4.
Straining wire
5.
Wire clamps
8.
Wind turbine
9.
IO 102 breaker box
11.
CU 200 control unit
14.
Water reservoir
15.
Level switch
TM02 2308 4101
Fig. 13. Wind-powered system with CU 200 and level switch
TM02 4377 0702
Fig. 14. Internal (and external) wiring of IO 102 breaker box and CU 200 SQFlex control unit
2
3
4
5
1
14
5
15
8
11
9
J1 J2
J5
CU 200
IO 102
Contact closed:
Tank full.
Contact open:
Tank below level.
sqflex_SI_US_WG.book Page 35 Thursday, October 1, 2009 3:27 PM