SQFlex Service Instructions

39 / 60
4.7 Combined system with CU 200 control unit and level switch
If the system does not work properly, follow the instructions in section 4.7.1 Trouble-shooting of a com-
bined system with CU 200 control unit and level switch on page 40.
Pos. Component
1.
SQF pump
2.
Submersible drop cable
3.
Cable clips
4.
Straining wire
5.
Wire clamps
6.
Solar modules
7.
Support structure
8. Wind turbine
9. IO 102 breaker box
11. CU 200 control unit
14. Water reservoir
15. Level switch
TM02 2310 4101
Fig. 17. Combined system with CU 200 and level switch
TM02 4376 0702
Fig. 18. Internal (and external) wiring for IO 102 SQFlex breaker box and CU 200 SQFlex control unit
2
3
4
5
1
14
5
15
7
8
9
6
11
J1 J2
J5
CU 200
IO 102
Contact closed:
Tank full.
Contact open:
Tank below level.
sqflex_SI_US_WG.book Page 39 Thursday, October 1, 2009 3:27 PM